Krups KRUPS Waffle Maker Instructions for Perfect Waffles Every Time

Page 5

English

Thank you for purchasing this KRUPS appliance.

Whatever model you have, please read these

instructions carefully and keep them for future

Connect the Brown wire to the terminal in the plug marked “L” or coloured Red.

Connect the Blue wire to the terminal in the

InstallationCooking

reference.

Description (1)

a“On/off” light (red)

b“Ready” light (green)

cAdjustable thermostat

dHandle release button

eHandle

fRemovable waffle plates

gPlate retaining pins

hNotches for easier handling of plates

iSpill tray

jNon-removable cord

plug marked “N” or coloured Black.

Seek professional advice if you are unsure of the correct procedure for the above.

ABOUT YOUR FACTORY FITTED PLUG

The cord is already fitted with a plug incorporating an appropriate fuse. If the plug does not fit your socket outlet, see paragraph below. Should you need to replace the fuse in the plug supplied, an appropriately rated approved BS 1362 fuse must be used (refer to electrical specification for fuse rating).

If the plug supplied does not fit your socket outlet, it should be removed from the mains lead and disposed of safely. The flexible cord insulation should be stripped back as appropriate and a suitable alternative plug fitted. The replacement plug must be equipped with an appropriate fuse. If the plug has external access to the fuse (non-rewirable type plug) please note that the fuse cover is an important part of the plug. Please ensure that it

Place the appliance on a stable, heat resistant surface: do not use it on a soft surface such as a table pad.

Do not place the appliance on or near slippery or hot surfaces. Do not let the cord hang down over a source of heat (hot plates, gas cookers, etc.).

Before using the appliance for the first time:

Put the handle in a horizontal position (2).

Open the appliance.

Remove any packaging, stickers and accessories from both inside and outside the appliance.

Pour a little oil onto the plates. Wipe with a soft cloth.

Place the spill tray (i) underneath the appliance (1).

Set the thermostat (c) to the position of your choice or as required for the recipe.

Open the appliance.

Do not touch the hot surfaces of the appliance: use the handle (e).

Use a ladle to pour waffle batter onto the bottom plate (f) of the appliance (5).

Close the appliance and press down firmly.

Wait 10 seconds then turn the appliance over, turning the handle (e) to the right (6-I).

Cook the waffles for the time indicated in the recipe.

When they are cooked, turn the appliance over again, turning the handle (e) to the left (6-II).

Open the appliance and remove the waffles.

For U.K. users only : additional

information and instructions

WIRING INSTRUCTIONS

WARNING: ALL APPLIANCES MUST BE EARTHED.

IMPORTANT: the wires in this lead are coloured in accordance with the following codes.

Green and Yellow : Earth

Blue: Neutral

Brown: Live

Connect the Green/Yellow wire to the terminal in the plug marked “E” (or by the earth symbol) or coloured Green.

N: Blue

E: Green and

or black

yellow or green

L: Brown

or red

Fit correct

fuse(13 amp)

Use cable gripper

is always refitted correctly. If you lose this cover, please do not use the plug. You may contact our helpline for a replacement.

For any problems or queries, please contact our Customer Relations Team first for expert help and advice:

0845 602 1454 – UK (calls charged at local rate) (01) 47 51947 – Ireland

Handling the plates

Check that the appliance is cold and unplugged before handling the plates.

• To remove the plates (7):

Open the appliance and hold the handle (e) with one hand. With the other hand, grasp the plate (f) at the notches (h), pull it sideways and

disengage it from the retaining pins (g) to remove it.

• To insert the plates (8):

Insert the plate (f) at an angle into the retaining

pins (g) and press on the opposite side to

secure it correctly in the appliance.

Plugging in and preheating

the appliance

Close the appliance.

Check that your electrical installation is compatible with the power and voltage shown underneath the appliance.

Plug the appliance into an earthed socket only.

If the power supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

Plug the cord into a socket: the red “on/off” light (a) comes on (3).

Set the thermostat (c) to 6 and let the appliance preheat for approximately 5 minutes: when it has finished preheating, the green “ready” light (b) comes on (4).

When the appliance is used for the first time, it may give off a slight odour and smoke, this is normal.

After use

Set the thermostat to the minimum setting.

Unplug the cord.

Let the appliance cool down completely in the open position.

Clean the plates (f), the spill tray (i) and the body of the appliance with a sponge and washing up liquid.

The plates (f) and the spill tray (i) are dishwasher-safe.

Do not use a metal scouring pad or scouring powder.

Never immerse the appliance or the cord in water.

Storage

To save space, press the handle release button (d) and fold the handle down (9).

8

9

Image 5
Contents Page Page English Important Safeguards About Your Factory Fitted Plug Wiring InstructionsSoft Belgian Galettes Belgian WafflesGaufrier Expert / Expert Waffle Maker 2016204.581 09/03

Waffle Iron specifications

The Krups Waffle Iron is a kitchen appliance that elevates the art of waffle making, catering to both the casual home cook and the culinary enthusiast. Known for combining functionality with sleek design, it offers a modern approach to a beloved breakfast tradition.

One of the main features of the Krups Waffle Iron is its ability to produce a variety of waffle styles, including classic Belgian waffles and thinner, crispier varieties. Equipped with interchangeable plates, it allows users to customize their waffle-making experience. This feature provides versatility, enabling one to create different textures and flavors to suit individual tastes.

The appliance boasts a powerful heating element that ensures even heat distribution across the cooking surface. With adjustable temperature control, users can achieve their desired level of crispiness, ensuring perfect results every time. The LED indicator lights signal when the waffle iron is preheated and ready for batter placement, taking out the guesswork for users.

In terms of cleaning and convenience, the Krups Waffle Iron is designed with non-stick plates that make removing waffles effortless. This feature also simplifies the cleaning process, as residue can be wiped away easily, and some models even offer removable plates that are dishwasher safe.

The compact design of the waffle iron ensures that it fits neatly on kitchen counters or can be stored easily in cabinets. A built-in cord wrap helps manage the power cord, reducing clutter in the kitchen.

Safety is also a priority in the design of the Krups Waffle Iron, featuring non-slip feet that stabilize the unit during operation. Additionally, many models come equipped with steam release systems that prevent moisture buildup, ensuring that waffles remain crispy.

Constructed from durable materials, the Krups Waffle Iron is built to withstand regular use, providing reliable performance over time. With its combination of performance, safety, and user-friendly features, the Krups Waffle Iron stands out as a preferred choice for those passionate about waffles. Whether for a family breakfast or a leisurely brunch, this appliance delivers delicious results that can elevate any meal experience.