Component Access, Rubber Feet Replacement

6.Using thumbs, push down on control PCB board (located in cradle arm) until clamps release. (See Figure 1).

Component Access

Figure 1

7.Reach inside the wafﬂe baker cradle and squeeze the timer adjustment knob’s three slips and pull out knob from bezel.

8.Push timer adjustment knob through bezel hole until it locks into place. Be sure the timer adjustment knob location is rotated correctly with the control board. If the alignment is not correct the Max and Min time will be incorrect.

DIAL THERMOSTAT REPLACEMENT

A properly working dial thermometer will indicate:

■Cool Temperature – ambient temperature

■Preheat Temperature – ambient temperature to 350º F

■Ready – 350º F

If the dial thermometer is warped or the needle does not move to indicate wafﬂe plate temperature changes, replace the dial thermometer.

1.Unplug the wafﬂe baker.

2.Remove black screw cover located left of the unit’s top hinge. (See Figure 2)

Figure 2

3.Remove two (2) Phillips screws and lift metal cover.

4.Replace the dial thermometer and reassemble. (See Figure 3)

Figure 3

RUBBER FEET REPLACEMENT

Check the four (4) rubber feet on the bottom of the wafﬂe baker when servicing.

1.Remove the screw from each foot.

2.Remove each rubber foot and replace.

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

Access the wafﬂe baker’s power supply cord, power supply PCB board, control PCB board and button covers from the bottom of the unit.

1.Unplug the wafﬂe baker.

2.Place the wafﬂe baker upside down on a cushioned surface.

3.Remove four (4) recessed Phillips screws from feet and two

(2) recessed Phillips screws from base cover.

4.Lift off base.

POWER CORD REPLACEMENT

Do not run the wafﬂe baker if the power cord is damaged. Replace with a new cord assembly immediately.

1.Unplug the wafﬂe baker.

2.Remove base, see Component Access.

3.Remove two (2) Phillips screws from power cord wire clamp.

4.Remove the power cord ground wire terminal (green) and the MOV board ground wire terminal from the ground lug.

5.Remove two (2) power cord MOV blue-capped AC leads [one

(1) black and one (1) white] from printed circuit board (PCB) located on base. (See Figure 4)

Figure 4

6.Remove MOV power board and cord assembly.

7.Hot glue new MOV board to base. Reassemble leads. Be sure that the green lead terminals are connected securely to ground lug. Be sure AC leads are connected securely to PCB. The black lead goes to the ACL terminal and the white lead goes to the ACN terminal.

KPWB100OB specifications

The KitchenAid KPWB100OB is a powerful and versatile stand mixer that has earned its place in kitchens worldwide. This unit offers a perfect blend of performance and style, making it a must-have for both amateur cooks and professional chefs. One of its standout features is the 300-watt motor, which provides robust mixing capabilities across a range of ingredients and recipes. From whipping cream to kneading dough, this mixer is designed to handle it all without breaking a sweat.

A highlight of the KPWB100OB is its 10-speed slide control. This feature allows for precise adjustments, enabling users to tackle a variety of tasks with ease. Whether you need slow speed for folding in delicate ingredients or a high speed for thorough mixing, the KPWB100OB responds with the perfect amount of power. The stainless-steel bowl has a capacity of 4.5 quarts, providing ample space for larger batches while ensuring that smaller quantities are also mixed efficiently. This bowl is dishwasher safe, making cleanup a breeze.

The mixer also comes with a range of attachments that enhance its versatility. Included are the flat beater, dough hook, and wire whip, each designed for specific tasks to achieve the best results. These attachments are easy to switch out, allowing users to move seamlessly from one preparation to another. Additionally, the mixer features a tilt-head design, which allows for easy access to the bowl and attachments, making ingredient addition simple and straightforward.

One of the technological advancements utilized in the KPWB100OB is the planetary mixing action. This design ensures that the mixer is able to thoroughly mix all ingredients, reaching every part of the bowl. The combination of a powerful motor, precise speed settings, and effective mixing action results in a stand mixer that consistently delivers professional-quality mixing results.

Built with durability in mind, the KitchenAid KPWB100OB features a sturdy construction that is designed to last. The sleek onyx black finish adds a modern touch, making this mixer an attractive addition to any kitchen décor. Whether you are a seasoned baker or just starting, the KitchenAid KPWB100OB is a reliable and efficient kitchen companion that empowers culinary creativity and makes food preparation an enjoyable experience.