English
SPECIFICATIONS
1.Gas Strip Nailer
Dimensions | ||
Length × Height × Width | (347 mm × 353 mm × 108 mm) | |
|
| |
Weight | 7.7 lbs. (3.5 kg) | |
|
| |
Nail capacity | 37 nails (1 strip) | |
|
| |
Cycle rate | Intermittent: 2 – 3 nails per second | |
Continuous: 1,000 nails per hour | ||
| ||
|
| |
Battery | EB714S (1.4 Ah) | |
| ||
|
| |
Fuel Cell | Type No. |
2. Battery Charger (UC7SD)
Input power source | Single phase: AC120V 60Hz | |
Charging time | Approx. 60 min. | |
(At a temperature of 70°F (20°C)) | ||
| ||
Charging voltage | DC 7.2 V | |
Charging current | DC 1.6 A | |
Weight | 2.4 lbs. (1.1 kg) |
NOTE: The charging time may vary according to temperature and power source voltage.
NAIL SELECTION
WARNING
⬤Be sure to use only the genuine HITACHI nails for the NR90GC. The use of any other nails can result in tool malfunction and/or nail breakdown, leading to serious injuries.
Only nails shown in the Table below can be driven with this Nailer.
Paper collated strip nails | Min. | Max. |
.266" | .303" | |
| ||
| (6.8 mm) | (7.7 mm) |
| 2"(50mm) | (90mm) |
|
| |
| .120" | .131" |
| (3.0 mm) | (3.3 mm) |
*This Nailer is not recommended for use with from 3" to
ACCESSORIES
DANGER
⬤Accessories other than those shown below can lead to malfunction and resulting injuries.
STANDARD ACCESSORIES
| 1 | Safety glasses | 1 | |
| 2 | Battery | 1 | |
| 3 | Charger | 1 | |
1 | 4 | Case | 1 | |
5 | Allen wrench for M5 screw | 1 | ||
| ||||
2 |
| 3 |
| |
|
|
|
4 5
OPTIONAL ACCESSORIES
sold separately |
|
◯ Fuel Cell | Code No. |
◯Gas Strip Nailer Lubricant
8 oz. (250 cc) oil feeder (Code No.
NOTE: Accessories are subject to change without any obligation on the part of HITACHI.
— 11 —
