(3) INSERT FUEL CELL INTO NAILER.
1Pulling the latch and open the cell cover. Latch
Cell cover
2Insert the fuel cell into nailer.
Fuel cell 
3Insert the stem of fuel cell into the hole of adaptor.
Adapter 
Stem
Fuel cell
Adapter Stem
Fuel cell
4Close the cell cover.
Cell cover
(4)Remove the finger from the trigger and press the push lever against the workpiece with pulling back the feeder knob.
☐ THE NAILER MUST NOT OPERATE.
Depress push lever
Do not pull trigger Feeder knob
English
(5)Separate the push lever from the workpiece.
Next, point the nailer downward, pull the trigger and then wait in that position for 5 seconds or longer.
☐ THE NAILER MUST NOT OPERATE.
Pull trigger
(6)Without touching the trigger, depress the push lever against the workpiece.
Pull the trigger.
☐THE NAILER MUST OPERATE.
(7)If no abnormal operation is observed, you may load nails in the Nailer.
Drive nails into the workpiece that is the same type to be used in the actual application.
☐THE NAILER MUST OPERATE PROPERLY.
LOADING NAILS
WARNING
⬤When loading nails into Nailer,
1)do not depress trigger;
2)do not depress push lever; and
3)keep Nailer pointed downward.
(1) Insert nail strip into the back of the magazine.
Magazine
(2) Slide the nail strip forward in the magazine.
— 15 —
