Precautions and General Information

DANGER:BURN HAZARD

Contact with hot oil will cause severe burns. Always wear protective clothing and heat resistant gloves when operating the fryer or filtering the oil.

WARNING: ELECTRIC SHOCK HAZARD

All servicing requiring access to non-insulated components must be performed by qualified service personnel. DO NOT open any access panel that requires the use of tools. Failure to heed this warning may result in severe electric shock.

CAUTION: BURN HAZARD

Contact with hot oil may cause burns. DO NOT fill fryer beyond MAX OIL line on frypot. For disposal of oil use only a container specifically designed for the disposal of hot oil. DO NOT fill hot oil disposal container beyond MAX OIL line.

This appliance is intended for use in commercial establishments only.

This appliance is intended to prepare food for human consumption. No other use is recommended or authorized by the manufacturer or its agents.

Operators of this appliance must be familiar with the appliance use, limitations and associated restrictions. Operating instructions must be read and understood by all persons using or installing this appliance.

Cleanliness of this appliance is essential to good sanitation. Read and follow all included cleaning instructions and schedules to ensure the safety of the food product.

Disconnect this appliance from electrical power before performing any maintenance or servicing.

DO NOT submerge this appliance in water. This appliance is not jet stream approved. Do not direct water jet or steam jet at this appliance, or at any control panel or wiring. Do not splash or pour water on, in or over any controls, control panel or wiring.

Exposed surfaces of this appliance can be hot to the touch and may cause burns.

The technical content of this manual, including any wiring diagrams, schematics, parts breakdown illustrations and/or adjustment procedures, is intended for use by qualified technical personnel.

Any procedure which requires the use of tools must be performed by a qualified technician.

This manual is considered to be a permanent part of the appliance. This manual and all supplied instructions, diagrams, schematics, parts breakdown illustrations, notices and labels must remain with the appliance if it is sold or moved to another location.

This appliance is made in the USA. Unless otherwise noted, this appliance has American sizes on all hardware.

CAUTION:

Risk of

Damage

DO NOT connect or energize this appliance until all installation instructions are read and followed. Damage to the appliance will result if these instructions are not followed.

CAUTION:

Hot Surface

Exposed surfaces can be hot to the touch and may cause burns.

Model LLF-14 specifications

The Wells Model LLF-14 is a remarkable piece of engineering that showcases innovation in design and functionality in various applications. Designed primarily for industrial use, the LLF-14 serves as a durable solution for demanding operational environments where efficiency, reliability, and precision are paramount.

One of the key features of the Wells Model LLF-14 is its robust construction. The chassis is manufactured from high-grade materials that offer resilience against wear and tear, making it suitable for heavy-duty applications. This durability extends the lifecycle of the equipment, providing businesses with long-term value and reducing maintenance costs.

Another notable characteristic of the LLF-14 is its advanced control system, which incorporates cutting-edge technology for seamless operation. The intuitive interface allows users to easily monitor performance metrics and adjust settings in real time. This ensures that operators can maintain optimal efficiency while adapting to varying operational conditions without the need for extensive training.

The LLF-14 also integrates sophisticated automation technologies, including programmable logic controllers (PLCs) and advanced sensors. These technologies facilitate enhanced monitoring capabilities, allowing for better predictive maintenance and minimizing downtime. The automation system streamlines processes, leading to improved productivity and operational effectiveness.

In terms of versatility, the Wells Model LLF-14 is designed to excel across multiple applications. Whether used in manufacturing, construction, or logistical operations, the equipment can be easily customized to meet specific industry requirements. This adaptability is further enhanced by the ability to add various attachments and modules that cater to different tasks.

Moreover, the LLF-14 prioritizes energy efficiency. Equipped with state-of-the-art energy-saving features, the model not only helps reduce operational costs but also aligns with sustainability goals. This focus on environmental responsibility is becoming increasingly important for businesses aiming to reduce their carbon footprint.

In summary, the Wells Model LLF-14 is a powerhouse of reliability, efficiency, and versatility. With its robust construction, advanced control systems, and commitment to energy conservation, it stands out as a preferred choice for industries demanding high-performance machinery. As technology continues to evolve, the LLF-14 remains an exemplary model, setting benchmarks in reliability and innovation within the industrial sector.