Wells Model LLF-14 operation manual Normal Operation

Page 8

OPERATION

DANGER: BURN HAZARD

Contact with hot oil will cause severe burns.

Always wear protective clothing and heat resistant gloves when operating the fryer.

CAUTION:

Hot Surface

Exposed surfaces can be hot to the touch and may cause burns.

Fig. 3 Temperature Control Knob

Fig. 4 Oil Level Marking

NOTE: If the oil temperature exceeds 440ºF, the hi-limit safety will shut down the unit, and light the red TROUBLE light. To reset:

Allow the oil to cool, then press the red button on the back of the element head until it “clicks” and stays in. If tripping persists, see Troubleshooting Suggestions, page 9.

NORMAL OPERATION

1.a. Be sure the TEMPERATURE CONTROL KNOB is turned to OFF.

b.Lower the ELEMENT HEAD into the frypot by pushing back on the ELEMENT LIFTING HANDLE, raising the SUPPORT ROD, then carefully lowering the elements.

2.Fill the FRYPOT with commercial-grade liquid shortening to the MIN OIL line. Capacity: 14 pounds.

IMPORTANT: DO NOT overfill the frypot. Cold oil will expand as it heats. Adding too much oil will allow the frypot to overflow during operation.

For best results, always use top grade commercial shortening made specially for frying. Maintain proper oil level in frypot during operation.

3.Turn the TEMPERATURE CONTROL KNOB to the desired temperature. The HEAT INDICATOR will glow. When the oil reaches the desired temperature, the heat indicator will go out. The heat indicator will go off and on during operation as the thermostat cycles to maintain temperature.

For best results: DO NOT set temperature control to a temperature setting higher than is required for the food product.

4.Load either or both baskets no more than 1/2 full with food product.

a.DO NOT overload fry baskets. For best results, load baskets uniformly to half full.

b.Using the basket handle, lower the baskets into the hot oil.

c.When food is cooked, lift the basket out of the oil by the handle. Hang the baskets on the BASKET SUPPORT ROD to drain.

5.When the heat indicator light cycles off, the fryer is ready to cook the next load.

6.Reduce temperature control to 225ºF during idle periods to save power and extend the life of the oil. The fryer will return to operating temperature in just a few minutes when needed.

7.Keep the fryer clean at all times. Rinse baskets frequently, and dry thoroughly, in order to prevent oil contamination.

8.Drain the frypot completely after use. Filter the oil daily, or more often during heavy use.

6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents 305 Important do not Discard this ManualLimited Warranty Statement Introduction Table of ContentsSpecifications Features & Operating Controls Precautions and General Information Risk DamageInstallation SetupAgency Listing Information Unpacking & InspectionInstallation Operation Normal OperationCleaning Instructions CleaningPreparation FrequencyDisposal of Used OIL OIL DisposalSlip and Fall Hazard Health HazardTroubleshooting Suggestions Description Possible Problem Suggested RemedyMaintenance Periodic CleaningParts & Service Description

Model LLF-14 specifications

The Wells Model LLF-14 is a remarkable piece of engineering that showcases innovation in design and functionality in various applications. Designed primarily for industrial use, the LLF-14 serves as a durable solution for demanding operational environments where efficiency, reliability, and precision are paramount.

One of the key features of the Wells Model LLF-14 is its robust construction. The chassis is manufactured from high-grade materials that offer resilience against wear and tear, making it suitable for heavy-duty applications. This durability extends the lifecycle of the equipment, providing businesses with long-term value and reducing maintenance costs.

Another notable characteristic of the LLF-14 is its advanced control system, which incorporates cutting-edge technology for seamless operation. The intuitive interface allows users to easily monitor performance metrics and adjust settings in real time. This ensures that operators can maintain optimal efficiency while adapting to varying operational conditions without the need for extensive training.

The LLF-14 also integrates sophisticated automation technologies, including programmable logic controllers (PLCs) and advanced sensors. These technologies facilitate enhanced monitoring capabilities, allowing for better predictive maintenance and minimizing downtime. The automation system streamlines processes, leading to improved productivity and operational effectiveness.

In terms of versatility, the Wells Model LLF-14 is designed to excel across multiple applications. Whether used in manufacturing, construction, or logistical operations, the equipment can be easily customized to meet specific industry requirements. This adaptability is further enhanced by the ability to add various attachments and modules that cater to different tasks.

Moreover, the LLF-14 prioritizes energy efficiency. Equipped with state-of-the-art energy-saving features, the model not only helps reduce operational costs but also aligns with sustainability goals. This focus on environmental responsibility is becoming increasingly important for businesses aiming to reduce their carbon footprint.

In summary, the Wells Model LLF-14 is a powerhouse of reliability, efficiency, and versatility. With its robust construction, advanced control systems, and commitment to energy conservation, it stands out as a preferred choice for industries demanding high-performance machinery. As technology continues to evolve, the LLF-14 remains an exemplary model, setting benchmarks in reliability and innovation within the industrial sector.
Top Page Image Contents