TROUBLESHOOTING
SYMPTOM | POSSIBLE CAUSE | SUGGESTED REMEDY |
|
|
|
Hotplate won’t heat | Disconnect turned OFF or circuit | Turn disconnect ON |
| breaker tripped | Check / reset circuit breaker |
|
|
|
One or more sections | Temperature control not on | Turn temperature control to |
won’t heat |
| desired setting |
|
|
|
| Damaged temperature control, | Contact Authorized Wells |
| element or other internal component | Service Agency for repairs |
|
|
|
Hotplate not hot enough | Temperature control not set | Adjust for desired temperature |
|
|
|
| Operating 208/240V unit at 120V | Be sure supply voltage |
|
| matches nameplate voltage |
|
|
|
| Damaged temperature control, | Contact Authorized Wells |
| element or other internal component | Service Agency for repairs |
|
|
|
Hot surface indicator does | Damaged temperature control, | Contact Authorized Wells |
not light, or stays on | element or other internal component | Service Agency for repairs |
|
|
|
NOTE: There are no user serviceable components in the hotplate. In all cases of damage or component malfunction, contact your Authorized Wells Service Agency for repairs.
8