Wells H-006UL owner manual Table of Contents, Introduction, Specifications

TABLE OF CONTENTS

WARRANTY	xi
SPECIFICATIONS	1
FEATURES & OPERATING CONTROLS	2
PRECAUTIONS & GENERAL INFORMATION	3
AGENCY LISTING INFORMATION	3
INSTALLATION	4
OPERATION	5
CLEANING INSTRUCTIONS	5
EXPLODED VIEW AND PARTS LIST	6
PARTS & SERVICE	7
CUSTOMER SERVICE DATA	7

INTRODUCTION

Thank You for purchasing this Wells Manufacturing Co. appliance.

Proper installation, professional operation and consistent maintenance of this appliance will ensure that it gives you the very best performance and a long, economical service life.

This manual contains the information needed to properly install this appliance, and to use and care for the appliance in a manner which will ensure its optimum performance.

SPECIFICATIONS

MINIMUM CLEARANCES REQUIRED

UNIT-TO-NEAREST SURFACE

BACK	SIDE	BOTTOM*	FRONT**
1"	1"	8"	2-1/4"
25 mm	25 mm	203 mm	57"

* If storage is to be used beneath unit, a baffle must be placed 8" beneath the hotplate to prevent contact.

** Front of counter to cutout.

If control box is placed directly beneath the hotplate, clearance may be 1".

ELECTRICAL SPECIFICATIONS

MODEL	VOLTS	WATTS	AMPS	FIELD WIRING
H-006UL	120 VAC 1ø	70	0.6	2 wire (L1, Neutral) + Gnd
				14 AWG Copper 90ºC

1