Wells HD8799, HD8802 Installation, Electrical Damage, Equipment Hazard, Leveling the Unit

Page 6

INSTALLATION

READ THIS CAREFULLY BEFORE STARTING THE INSTALLATION

CAUTION: Equipment

Electrical Damage

DO NOT plug in or energize this appliance until all Installation Instructions are read and followed. Damage to the Brewer will occur if these instructions are not followed.

CAUTION: Unstable

Equipment Hazard

It is very important for safety and for proper operation that the warmer is level and stable when standing in its final operating position. Provided non-skid feet must be installed at each corner of the unit. Do not install this appliance if the feet are missing or damaged.

WARNING ELECTRIC SHOCK HAZARD:

Warmer must be properly grounded to prevent possible shock hazard. Electrical shock will cause death or serious injury.

IMPORTANT:

Supply power must match nameplate for voltage and phase. Connecting to the wrong voltage will damage the warmer or result in decreased performance. Such damage is not covered by warranty.

REFER TO EXPLODED VIEWS PAGE 9 FOR COMPONENT NAMES/NUMBERS

Unpack the unit. Inspect all components for completeness and condition. Ensure that all packing materials have been removed from the unit.

LEVELING THE UNIT

Verify that a slip-resistant foot is installed at each corner of the dispenser.

Set the warmer in its operating location. Be sure all four feet touch the counter to prevent tipping.

ELECTRICIAN’S INSTALLATION INSTRUCTIONS

REFER TO ELECTRICAL SPECIFICATIONS - Page 1 Check the nameplate to determine correct electrical service required for the warmer.

Models HD8799 and HD8802 dispensers are equipped with a cord and plug. They requires a 115 - 125 volt circuit (50/60 Hz, 2 wire plus ground, with NEMA 5-15R receptacle).

IMPORTANT: The ground prong of the plug is part of a system designed to protect you from electrical shock in the event of internal damage. Never cut off the ground prong nor twist a blade to fit an existing receptacle. Contact a licensed electrician to install the proper circuit and receptacle.

GROUND

PIN

NEMA 5-15P

NEMA 5-15R

PLUG

RECEPTACLE

595 p/n 75982 OpM Heated Dispenser

4

Image 6
Contents 595 595 p/n 75982 OpM Heated Dispenser Applicability HD8799 2½-Gallon Dispenser HD8802 5-Gallon DispenserFeatures & Operating Controls Agency Listing Information Electrical Damage InstallationELECTRICIAN’S Installation Instructions Equipment HazardUSE OperationPreparation Nightly CloseCleaning Instructions Electric Shock HazardTroubleshooting Suggestions Symptom Possible Cause Suggested RemedyExploded View & Parts List Model HD8799 2½-GALLON DispenserExploded View & Parts List Servicing Instructions Wiring DiagramAccess Bottom Panel FaucetParts & Service Wells Bloomfield, LLCGenuin e Parts

HD8802, HD8799 specifications

Wells HD8799 and HD8802 are two fascinating exoplanetary systems that have garnered significant interest in astronomical research. Discovered in recent years, these planetary systems provide a unique glimpse into the diversity of worlds beyond our own Solar System. Located approximately 129 light-years away from Earth, both HD8799 and HD8802 are situated in the constellation Pegasus and have distinct characteristics that set them apart in the field of exoplanet studies.

The HD8799 system is particularly notable for its four known gas giant exoplanets: HD8799 b, c, d, and e. The star itself is a young A-type main sequence star, which contributes to the brightness and detectability of the planets in this system. The most remarkable feature of HD8799 is the fact that its planetary companions were among the first directly imaged exoplanets. This imaging was achieved using advanced adaptive optics and coronagraphy techniques that allow astronomers to distinguish the faint light of the planets from the overwhelming brightness of the star itself. As a result, HD8799 has become a prime target for studying the atmospheres of exoplanets, providing insights into their composition and climatic conditions.

Currently, researchers are exploring the chemical makeup of the atmospheres of these distant worlds using spectroscopic analysis. The discoveries of water vapor, carbon monoxide, and other molecules have raised intriguing questions about the potential for habitability and the formation processes of gas giants in the early universe.

On the other hand, the HD8802 system presents an interesting contrast. It is a K-type star surrounded by at least one known exoplanet, HD8802 b. This gas giant is particularly noteworthy for its close proximity to its parent star, resulting in a unique environment that influences its atmospheric dynamics. The star's lower temperature compared to A-type stars means that its planets experience different evolutionary paths, making HD8802 an ideal candidate for comparative studies with systems like HD8799.

Both HD8799 and HD8802 offer rich opportunities for advancing our understanding of planetary formation, evolution, and the characteristics of exoplanet atmospheres. The use of cutting-edge technologies in telescopes and imaging techniques continues to enhance our knowledge of these distant worlds, revealing the complex interactions between stars and their planetary systems. As research on these systems progresses, they promise to unveil crucial information about the role of gas giants in the ecosystem of stars and the formations of planetary systems.