DeLonghi D 61 E manual Normal Cooking Without the USE of the Programmer, Electronic Timer

ELECTRONIC CLOCK (fig. 13)

The programmer is equipped with an electronic clock with lighted numbers which indicates hours and minutes.

Upon immediate connection of the oven or after a power cut, three zeros will flash on the programmer panel.

To set the hour it is necessary to push

the button and then the or

button until you have set the exact hour (fig. 13).

Another way is to simultaneously push

the two buttons and at the

same time push the or button. Nota: Changing the hour button deletes any cooking program.

NORMAL COOKING WITHOUT THE USE OF THE PROGRAMMER

To manually use the oven, that is, without the aid of the programmer, it is necessary to cancel the flashing AUTO by pushing

the button (AUTO will be switched off

and the symbol will go on - Fig. 14). Attention: If the AUTO symbol is steady a cooking program has already been programmed, by pushing the button you have cancelled of the program and the switched to manual.

If the oven is switch on, you must switch off manually.

ELECTRONIC TIMER

The timer program consists only of a buzzer which may be set for a maximum period of 23 hours and 59 minutes.

If the AUTO flashing push the button.

To set the time, push the button

and the or until you obtain the desired time in the panel (fig. 15). Having finished the setting, the clock hour will appear on the panel and the symbol will be lighted.

The countdown will start immediately and may be seen at any moment on the panel by simply pressing the button .

At the end of the time, the symbol will be switched off and an intermittent buzzer will go off; this can be stopped by pressing any of the buttons.

SETTING THE FREQUENCY OF THE AUDIBLE SIGNAL

The selection from 3 possibilities of sound can be made by pressing the button.

Figure 14

24

Figure 15

A

U

T

O