DeLonghi EC710 manual Using for the first time, Installation

Page 3

Thank you for choosing this coffee machine. To get the very best out of your new coffee machine it is advisable to read these instructions before using the appliance. This is the only way to ensure optimum results and maximum safety.

Using for the first time

Before using the machine for the first time, wash all the acces- sories in warm soapy water and rinse. For the best tasting coffee the internal circuits must be flushed through at least five times.To flush through the espresso function follow the instructions in the paragraph “How to prepare espresso coffee” using just water.

Installation

Place the coffee maker on a flat work surface at a safe distance from taps and sinks.

Check that the voltage corresponds to that indicated on the appliance rating plate.The appliance must always be connected to a well-earthed socket rated at 10A minimum.The manufac- turer is not liable for damage caused by inadequate earthing of the appliance.

In the event of incompatibility between the plug on the appli- ance and the socket, have the plug replaced by a qualified pro- fessional.

If the cable is damaged or requires replacing, contact a service centre authorised by the manufacturer only.

Never install the machine in an environment that can reach a temperature less than or equal to 0°C (if the water in it freezes, the coffee maker may be damaged).

3

Coffee Maker

Image 3
Contents Coffee Maker EC710 Coffee Maker Installation Using for the first timeHow to prepare espresso coffee Filling the water tankPreheating the coffee machine To turn the coffee machine off, press the ON/OFF button fig Coffee Maker How to make cappuccino HOT Water Production Cleaning the filter holder for ground coffee Cleaning and maintenanceCleaning the pod filter holder if fitted Cleaning the boiler outletDescaling the espresso coffee section Cold Problem solvingProblem Possible Causes Solution Safety Warnings Electrical requirements 5732135300/01.05