DeLonghi ECAM45.760 Installing the appliance, Setting up the appliance, Turning the Appliance on

Page 10

Installing the appliance

Important!

When you install the appliance, you should respect the fol- lowing safety warnings:

•The appliance gives off heat. After positioning the applian- ce on the worktop, leave a space of at least 3 cm between the surfaces of the appliance and the side and rear walls and at least 15 cm above the coffee machine.

•Water penetrating the appliance could cause damage. Do not place the appliance near taps or sinks.

•The appliance could be damaged if the water it contains freezes. Do not install the appliance in a room where the temperature could drop below freezing point.

•Arrange the power cable in such a way that it cannot be damaged by sharp edges or contact with hot surfaces (e.g. electric hot plates).

Setting up the appliance

Important!

Check that the mains power supply voltage corresponds to the value indicated on the rating plate on the bottom of the appliance.

Connect the appliance to an efficiently earthed and correctly installed socket with a minimum current rating of 10A only.

If the power socket does not match the plug on the appliance, have the socket replaced with a suitable type by a qualified professional.

Using the appliance for the first time

Please note!

•Coffee has been used to factory test the appliance and it is therefore completely normal for there to be traces of coffee in the mill. The machine is, howe- ver, guaranteed to be new.

•You should customise water hardness as soon as possible following the Instruction for use in the section “Setting

water hardness (page 19).

1.Plug the power cable into the socket on the back of the appliance and connect the appliance to the mains power

supply (fig. 1) and make sure that the main switch, located on the side of the appliance, is pressed (fig. 2).

Select the desired language by scrolling forwards or backwards

using the FLAT WHITE or button, or alternatively waiting for the language options to scroll automatically on the display

(about every 3 seconds):

 

2. When “English” appears, hold the

button (fig. 3) for a

few seconds until “English set” is displayed.

Follow the instructions indicated on the appliance display:

3.“FILL TANK”: extract the water tank (fig. 4), open the lid (fig. 5), fill to the MAX line with fresh water (fig. 6); close the lid again and then replace the tank.

4.INSERT WATER SPOUT”: Check that the hot water spout is inserted on the connection nozzle and place a container hol- ding a minimum of 100 ml underneath (fig. 7).

5.“Insert Water Spout and Press Ok” is displayed;

6.Press the button to confirm (fig. 3). The appliance deli- vers water from the spout then goes off automatically.

The coffee machine is now ready for normal use.

Please note!

•When using the appliance for the first time, you need to make 4-5 cups of coffee or 4-5 cappuccinos before it starts to give satisfactory results.

•When making the first 5-6 cappuccinos, it is normal to hear the noise of boiling water. After this, the noise becomes less.

•To enjoy your coffee even more and improve the perfor- mance of your appliance, we recommend installing a water softener filter as described in the section “ WATER SOFTE- NER FILTER “ (page 19). If your model is not provided with a filter, you can request one from De’Longhi Customer Experience.

TURNING THE APPLIANCE ON

Please note!

Before turning the appliance on, make sure the main switch is pressed (fig. 2).

Each time the appliance is turned on, it performs an automatic preheat and rinse cycle which cannot be interrupted.

The appliance is ready for use only after completion of this cycle.

Danger of burns!

During rinsing, a little hot water comes out of the coffee spouts and is collected in the drip tray underneath.

Avoid contact with splashes of water.

•

To turn the appliance on, press the

button (fig. 8).

 

The message “Heating up, Please wait” is displayed.

After heating, the message “Rinsing” is displayed. As well as he- ating the boiler, the appliance also heats the internal circuits by circulating hot water.

The appliance is at temperature when the message indicating the taste and quantity of coffee appears.

TURNING THE APPLIANCE OFF

Whenever the coffee machine is turned off after being used to make coffee, it performs an automatic rinse cycle.

9

Page 9 Page 11
Image 10
Page 9 Page 11
Contents 5713222661/01.14 ECAM45.760 B15 B14 B13 B12B10 A15 A14 A12 A16 A13Page 27A 27B Contents Safety IntroductionDescription Before USEUsing the appliance for the first time Installing the applianceSetting up the appliance Turning the Appliance onMenu Settings Setting water hardness Setting the languageSetting the temperature Default values resetMaking Coffee Customising the Long coffee quantity Making coffee using pre-ground coffeeMaking Long coffee using coffee beans Filling and attaching the milk containerMaking hot drinks using the Milk Menu Adjusting the amount of frothCleaning the milk container after use Making milk based coffees automaticallyDelivering steam Delivering HOT Water and SteamDelivering hot water Changing the quantity of water delivered automaticallyCleaning Cleaning the pre-ground coffee funnel Cleaning the water tankCleaning the coffee spouts Cleaning the infuserCleaning the hot water/steam connection nozzle Cleaning the milk containerDescaling Water Softener Filter Setting the Water HardnessInstalling the filter Measuring the water hardnessReplacing the filter Technical DataRemoving the filter Displayed Messages Troubleshooting Disposal By the earth symbol or coloured green or green and yellow Electrical Connection UK only

ECAM45.760 specifications

The DeLonghi ECAM45.760 is an advanced automatic espresso machine designed to cater to coffee enthusiasts who demand precision and quality in every cup. With its sleek and modern design, this machine not only enhances your kitchen aesthetic but also elevates your coffee experience.

One of the standout features of the ECAM45.760 is its integrated bean-to-cup system. This allows users to grind fresh coffee beans right before brewing, ensuring maximum freshness and flavor in each cup. The machine is equipped with a professional-quality grinder that comes with 13 adjustable settings, enabling you to customize the grind size to suit your preferred coffee style, whether it's a fine espresso or a coarser brew.

Additionally, the ECAM45.760 boasts a dual heating system, which allows for simultaneous brewing and frothing. This means that you can prepare your espresso and steam milk for lattes or cappuccinos without waiting, a feature appreciated by busy coffee lovers. The patented LatteCrema system ensures that you achieve the perfect froth, creating creamy, velvety milk textures that enhance your beverages.

The intuitive touch control panel is another highlight, featuring a clear display that makes navigating the machine's various settings effortless. You can easily select from a range of pre-programmed coffee recipes, or manually adjust the settings to create a customized drink. With six beverage options available at your fingertips, including espresso, coffee, cappuccino, and latte macchiato, there is something for everyone's taste.

Moreover, the ECAM45.760 includes a convenient automatic cleaning and descaling system, which simplifies maintenance and prolongs the machine's lifespan, making it an excellent investment for any coffee aficionado. The removable brewing unit is another essential feature, allowing for easy cleaning and maintenance.

In terms of capacity, this machine is equipped with a sizable water tank and bean container, reducing the frequency of refills. Overall, the DeLonghi ECAM45.760 embodies convenience, quality, and innovation, making it an ideal choice for those who value both versatility and excellence in their coffee brewing experience. Whether you're preparing a simple espresso or a more elaborate latte, this machine ensures consistency and quality with every brew.
Top Page Image Contents