DeLonghi ECAM23450 SL Auto-start, Setting the temperature, Energy Saving, Setting water hardness

Auto-start

You can set the auto-start time in order to have the appliance ready at a certain time (for example in the morning) so you can make coffee immediately.

Please note!

To activate this function, the time must already have been set correctly.

To activate Auto-on, proceed as follows:

1.Press the P button to enter the menu;

2.Turn the selection knob (fig. 7) until “Auto- start” is displayed;

3. Press the	button. “Activate?” is
displayed;

4.Press the button to confirm;

5.Turn the selection knob to choose the hours;

6. Press the button to confirm;

7.Turn the selection knob (fig. 7) to change the minutes;

8.Press the button to confirm;

9.Press the button to exit the menu. Once the time has been confirmed, activation

of auto-start is indicated by the symbol displayed alongside the time and under the Auto- start item in the menu.

To deactivate the function:

1.Select auto-start from the menu;

2.Press the button. “Deactivate?” is displayed;

3.	press the	button to confirm.
The	symbol	is no longer displayed.

Setting the temperature

To modify the temperature of the water used to make the coffee, proceed as follows:

1.Press the P button to enter the menu;

2.Turn the selection knob (fig. 7) until “Set temperature” is displayed;

3.Press the button;

4.Turn the selection knob until the required temperature (• = low; •••• = high) is displayed;

5. Press the button to confirm;

6. Press the button to exit the menu.

Energy Saving

Use this function to activate or deactivate energy saving mode. When activated, the function reduces energy consumption.

When energy saving mode is active, an asterisk appears below “Energy Saving” in the menu. EN To deactivate or activate “Energy Saving” mode, proceed as follows:

1.Press the P button to enter the menu;

2.Turn the selection knob (fig. 7) until “Energy

Saving” is displayed;

3. Press the button. “Deactivate?” is displayed, or “Active?” if the function has already been disabled.

4.Press the button to deactivate energy saving mode;

5.Then press the button to exit the

menu.

When the function is active, if the machine is not used for about 1 minute, “Energy Saving” is displayed.

Please note!

When in energy saving mode, a few seconds may elapse before the first coffee is delivered as the appliance must heat up again.

Setting water hardness

For instructions on setting water hardness, see page 19.

Setting the language

To change the language for the display, proceed as follows:

1.Press the P button to enter the menu;

2.Turn the selection knob (fig. 7) until “Set language” is displayed;

3.Press the button;

4.Turn the selection knob until the required language is displayed;

5.	Press the	button to confirm;
6.	Press the	button to exit the menu.

Install filter

For instructions on how to install the filter, see the section “Installing the filter” on page 19.

Replacing the filter

For instructions on how to replace the filter, see the section “Replacing the filter” on page 19.

Activate/deactivate the beep

This activates or deactivates the beep emitted by the machine each time the buttons are pressed or an accessory is inserted/removed.

11