Casio TDA-40-860R40 instruction manual Important Safeguards

Page 3

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing)

instructions in the literature! accompanying the product.

CAUTION

Risk of Electric Shock

Do Not Open

The Lightning flash with arrowhead symbol within an equilateral triangle is intended to alert you to the presence of uninsulated “dangerous voltage” within the products supplementary external power supply enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons.

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER FROM THIS UNIT. NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL THIS

UNIT IS FOR INDOOR USE ONLY.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE.

NOTE TO CATV SYSTEM INSTALLER

This reminder is provided to call the CATV System Installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

IMPORTANT SAFEGUARDS

Read all instructions prior to installation and use.

Retain Instructions – The safety and operating instructions should be retained for future reference.

1. Heed Warnings – All warnings on the amplifier and in the operating instructions should be adhered to.

2. Follow Instructions – All operating and use instruction should be followed.

3. Water and Moisture – Do not use near water – for example, in a wet basement, or near a swimming pool, and the like. This product is designed for indoor use only. Do not expose this product to rain or moisture.

4. Mounting and Ventilation – Proper mounting to a suitable surface utilizing the mounting holes in the bottom flange of the amplifier is essential to insure proper operation and prevent damage! Under no circumstances should the amplifier be supported or suspended from its AC power cord or the input and output coaxial cables. Whenever possible, the amplifier should be mounted with the cooling fins in a vertical position to ensure proper heat dissipation. Slots and openings n the housing are provided for ventilation. To ensure reliable operation of

6

3

Image 3
Contents TDA-40-860R40 FeaturesSpecifications Setup / OperationInstallation of Active Reverse Module TDA-RA84 Important Safeguards