Casio TDA-40-860R40 guide

the product and protect it from overheating, these openings must not be blocked or covered. This product should not be placed in a built-in installation such as a cabinet or rack unless proper ventilation is provided.

5.Proper Operation – To insure proper operation, the amplifier should be adjusted to within its proper operating range as per the amplifier specifications. Failure to do so may result in improper operation and product failure.

6.Fusing – The amplifier contains an external fuse (5x20mm, 0.35A, 250V) and an internal fuse (5x20mm, 1.0A, 250V) for protection. Should the amplifier fail to operate, unplug the unit, check the external fuse, or remove the front cover and check the internal fuse. Note, only replace fuse with the correct size fuse. Failure to do so may create a risk of fire or a hazardous situation.

7.Grounding or Polarization – This amplifier is equipped with a 3-wire grounding-type plug, a plug having a third (grounding) pin, the plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

8.Power-Cord Protection – Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

9.Overloading – Do not overload wall outlets as this can result in a risk of fire or electric shock.

10.Object and Liquid Entry – Never push objects of any kind into this amplifier through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the amplifier.

11.Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

12.Servicing – Do not attempt to service this amplifier yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Repair or other replacement should be returned to TONER. (969 Horsham Road, Horsham, Pennsylvania 19044 USA).

13.Outdoor Antenna Grounding – If an outside antenna or cable system is connected to the amplifier, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI / NAPA No. 70-1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.