12 | Vehicle Installation Guide |
If necessary, move the antenna to different positions until the signal comes loud and clear.
6.Mark this position with masking tape or use some other method that won’t scratch the body work.
Route the cable
1.Plan the routing of the antenna cable to the Plug and Play receiver antenna input.
Avoid any obstructions that could crimp, kink or twist the cable. Use protective grommets wherever you encounter rough openings.
2.At the lowest point of the rear window, route the cable into the trunk, taking advantage of existing cable conduits.
3.Snake the cable around the passenger compartment to the back of the SIRIUS cradle.
In SUVs and minivans, route the cable into the vehicle under the rubber molding of the hatch door or tailgate, and then under the interior trim.
Note
Avoid exposing the cable in the driver or passenger areas where it could become entangled in feet or other objects.
4.Plug the antenna cable into the connector on the side of the cradle.
5.Plug the cigarette lighter adapter into the +12VDC power receptacle.
The power LED on the power button glows red. You’re ready to enjoy SIRIUS programming.