Cambridge SoundWorks FPS2000 operating instructions Attaching The Floor Stands

Page 10

Attaching The Floor Stands

The rear satellites (with their desktop stands attached) may be installed in their floor stands.

1.One leg of each floor stand has a full length slot, with short notches opposite the slot at each end. Insert a satellite cable inside one of these legs

by feeding it down the length of the full length slot. At each end, feed the cable through the short notches (see diagram G).

2.Insert the satellite end of the leg/cable assembly into the middle socket of the apex joint. Make sure the satellite cable exits through the short notch and not the full length slot (see diagram F).

3.Insert the two solid legs into the outside sockets in the apex joint.

4.Position the two “cut-away” sections of the desktop stand over the opening in the top of the apex joint, as shown in diagram F. Be sure to align the face of the stand with the face of the apex joint. Lower the stand straight down into the apex joint.

5.

Holding the ends of the apex

 

joint, push on the front of the

 

desktop stand until it slips back

 

into the slot in the apex joint.

 

Confirm a secure fit.

6.

At the base of the rear leg,

 

gently pull on the satellite

 

cable to remove any

 

unnecessary slack in the cable.

7.

Insert a rubber plug into the

 

base of each leg, taking care to

 

feed the cable out the short

F

G

REAR

RIGHT

notch in the rear leg (see

diagram H).

H

6

FPS2000 Rev.C

10

4/17/00, 4:09 PM

Page 9 Page 11
Image 10
Page 9 Page 11
Contents FourPointSurround FPS2000 Digital Safety & Regulatory Information Important Safety Instructions Contents FourPointSurround FPS2000 Digital Multimedia Speaker SystemIntroduction Cambridge SoundWorksInspecting Overview Installation Sequence For Damage Rear Satellites Speaker PlacementFront Satellites SubwooferSpeaker Wiring Diagram Diagram E Satellite ConnectionsAttaching The Floor Stands Power Supply Adapter Audio Signal Connections Volume Control Connection To Sound Blaster Live! Via Digital DINUsing The Volume Control Mounting The Volume Control Master Level ControlAdjusting Output Level Bass Level Control If the FPS2000 Digital’sOptimizing The Sound Mounting The Satellites Your System To the wallPlayback Levels SpecificationsTechnical Support Inside U.S.A., Canada and Latin AmericaYear Limited Warranty Inside AsiaFPS2000 Rev.C 17/00, 410 PM FPS2000 Rev.C 17/00, 410 PM 0420003004 Rev. C

FPS2000 specifications

Cambridge SoundWorks FPS2000 is a notable 2.1 speaker system that has become a beloved choice among audiophiles and casual users alike, especially for gaming and multimedia applications. One of the standout features of the FPS2000 is its impressive sound quality, which is attributed to its advanced engineering and high-quality materials. The system comprises two satellite speakers and a powerful subwoofer, delivering an immersive audio experience that enhances video games, movies, and music.

The FPS2000’s satellite speakers are designed with precision, featuring a ported enclosure that allows for clear, articulate highs and mids. This design minimizes distortion, ensuring that even the most delicate sounds are reproduced with fidelity. The speakers utilize full-range drivers that provide a balanced sound stage, making them suitable for a variety of audio applications. The compact size of the satellite speakers also ensures they can fit easily into any setup without sacrificing audio performance.

The subwoofer of the FPS2000 is another highlight, featuring a down-firing design that enhances bass response. This subwoofer is capable of producing deep, punchy lows that bring out the best in action-packed games and music genres such as hip-hop and electronic dance music. The combination of planetary motion and bass reflex design in the subwoofer allows for a broader frequency response, making it versatile for both auditory landscapes and explosion-dense gaming sessions.

Equipped with advanced technologies, the FPS2000 utilizes a built-in amplifier that ensures optimal power delivery to both the satellites and subwoofer. This built-in amplification reduces the need for external equipment, simplifying setup and operation. Additionally, the speaker system features intuitive volume control, enabling users to adjust sound levels effortlessly.

The FPS2000 is designed for versatility, compatible with various devices including PCs, gaming consoles, and even portable audio devices. The simple connectivity options make it user-friendly, ensuring that anyone can set it up without technical challenges.

In summary, the Cambridge SoundWorks FPS2000 exemplifies quality audio engineering with its powerful subwoofer, well-designed satellite speakers, and effective amplification. Whether for gaming, movie watching, or listening to music, it offers robust performance with clarity, depth, and a well-rounded sound stage, making it a cherished choice among sound enthusiasts.
Top Page Image Contents