Konica Minolta NC-6 user manual Appendix, Product Specifications

Appendix

9 Appendix

9.1Product Specifications

9

Interface	Ethernet 10/100Base-T /TX (RJ-45)
TCP/IP Services	ARP, BootP*1, DHCP, DNS, IPP, lpr/lpd, Raw Socket, HTTPd
	1.1, Telnetd, SLP, AutoIP*2
Netware Services	Bindery, NDS, PServer mode, NPrinter mode, NDPS
	Frame Type (802.3, 802.2, 802.3 SNAP, Ethernet-II,
	AutoDetect)

*1 This device supports the BootP protocol, which is part of the TCP/IP protocol. If the BootP server has been enabled with the Network Setup utility, the IP address for the copier will be automatically assigned. For details, refer to the User Manual included on the PageScope CD.

*2 AutoIP is a function that allows the network interface card to automatically assign IP addresses that begin with 169.254 and use a subnet mask setting of 255.255.0.0. If there are two or more devices on the same network that use the AutoIP function, these devices can communicate with each other.

NC-6 9-1