Manuals / Konica Minolta / Computer Equipment / Network Card

Konica Minolta NC-6 user manual For Windows

Models: NC-6

1 50

Download 50 pages 42.42 Kb

Page 11

Manual background

2

Getting Ready

For Windows 2000

■ LPR

■ IPP

■ PORT9100

TCP/IP protocol

Windows 2000

LPR Printing

You can connect a copier and computer via the LPR Print Service.

The LPR Print Service is available with a standard installation of the operating system.

The TCP/IP protocol is used.

IPP Printing

You can connect a copier and computer via the IPP Print Service.

The IPP Print Service is available with a standard installation of the operating system.

HTTP (Hyper Text Transfer Protocol), which is part of the TCP/IP protocol is used. Businesses and organizations may have a firewall set up to prevent unauthorized access, however, it should normally be possible to traverse an HTTP firewall. This allows you to print to network printers beyond the firewall via an IPP connection.

Printing to Port 9100

You can connect a copier and computer via the Port 9100 Print Service.

The Port 9100 Print Service is available with a standard installation of the operating system.

The TCP/IP protocol is used.

2-4

NC-6

Image 11

Konica Minolta NC-6 user manual For Windows

Contents

Network Interface Card NC-6 User Manual6 Printing the Configuration Page ContentsChecking the Accessories 4 Connecting the Network Cable9 Appendix 8 Using PageScope LightFor Europe User InstructionsFor the U.S.A For CanadaNC-6 For countries subject to Class B regulationsFor countries not subject to Class B regulations 1 Welcome 1.2 About PageScope Light 1.1 Trademark Acknowledgements2 Getting Ready For Windows 95 OSR 2.5/ Windows 98/ Windows 98 SE/ Windows ME 2.1 Selecting the Network Print MethodLPR TCP/IP protocol Windows NT For Windows NTFor Windows IPP PORT9100 TCP/IP protocol Windows XP NetWare client PC Windows computer NetWare serverTCP/IP protocol or IPX/SPX protocol2.2 Checking the Setup Procedures LPR / PORT 9100 Printing IPP Printing NetWare Server/Client NDPS NetWare Server/Client except NDPS3.1 Accessories 3 Checking the AccessoriesNC-6 Checking the Accessories4.1 Types of Cable That Can Be Used 4 Connecting the Network Cable4.2 Connecting the Network Cable NC-6 Connecting the Network Cable5.1 Entering the IP Address From the Control Panel 5 Assigning an IP Address5.2 Assigning an IP Address Check with your network administrator to determine if there is a DHCP server available on the network. If there is, a special IP address will be assigned by the AutoIP function. However, the copier will not be able to communicate with other devices on the network that have had ordinary IP addresses assigned to them. For details about the AutoIP function, refer to “Product Specifications” on page 9-1. Always select “SPECIFY” when there is no DHCP server available Assigning an IP Address 8 Use the 10-key pad and 6 Printing the Configuration Page NC-6 Printing the Configuration Page7.1 Procedures Described in This Chapter 7 Connecting the Computer and Copier7.2.1 Peer-to-Peer Printing 7.2 Setting Up the Network ConnectionsPage NC-6 Connecting the Computer and Copier 10 Click Next 11 Click FinishWindows NT Installing the Microsoft TCP/IP Printing ServiceSetting Up the LPR Connection 7.2.3 Windows 2000/ Windows XP 7.2.4 IPP PrintingCheck the IPP Settings Using PageScope Light Page 7.2.5 Connecting a Copier to the NetWare Server NC-6 Setting Up NetWare 4.x/ 5.x/ 6 Remote Printer Mode7-10 Connecting the Computer and Copier Creating an NDPS Printer Agent Setting Up NetWare 5.x/ 6 Novell Distributed Print Service NDPSSetting Up the Windows Computer for the NetWare Client NC-6 Connecting the Computer and Copier7-14 HTTP server Access 8 Using PageScope Light8.1 What is PageScope Light? Using PageScope Light http//copierIPaddress 8.3 Accessing PageScope Light8.4 Using PageScope Light 8.2 System RequirementsClick on this to jump to the manufacturer’s Web site 8.5 About the Screen LayoutThis is used to select various setting items or display NC-6Be sure to change the administrator password before using 8.6 Logging In as an Administrator8.7 About the File Download Function The default password for Administrator mode is “sysadm”NC-6 Using PageScope Light9 Appendix 9.1 Product SpecificationsNC-6 9.2 TroubleshootingAppendix 4508-7782-01 Copyright 2003 KONICA MINOLTA BUSINESS TECHNOLOGIES, INCPrinted in China KONICA MINOLTA BUSINESS TECHNOLOGIES, INC