D3-4-2-1-4_A_En
D3-4-2-1-9a_En
D3-4-2-1-7c_A_En
D3-4-2-1-3_A_En
D3-4-2-1-7a_A_En

IMPORTANT

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION:

TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

D3-4-2-1-1_En-A

Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel.

IMPORTANT: THE MOULDED PLUG

This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse is fitted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating of 5 amps and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark

or the BSI mark

on the body of the fuse.

If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be obtained from your local dealer.

If the fitted moulded plug is unsuitable for your socket outlet, then the fuse shall be removed and the plug cut off and disposed of safely. There is a danger of severe electrical shock if the cut off plug is inserted into any 13 amp socket.

If a new plug is to be fitted, please observe the wiring code as shown below. If in any doubt, please consult a qualified electrician.

IMPORTANT: The wires in this mains lead are coloured in accordance with the following code: Blue : Neutral Brown : Live

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows ;

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.

How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse.

D3-4-2-1-2-2_B_En

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.

WARNING

To prevent a fire hazard, do not place any naked flame sources (such as a lighted candle) on the equipment.

WARNING

This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filed with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture.

WARNING

Before plugging in for the first time, read the following section carefully.

The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e.g., 230V or 120V) written on the rear panel.

Operating Environment

Operating environment temperature and humidity:

+5 ºC – +35 ºC (+41 ºF – +95 ºF); less than 85 %RH (cooling vents not blocked)

Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light)

This product complies with the Low Voltage Directive (73/23/EEC, amended by 93/68/EEC), EMC Directives (89/336/EEC, amended by 92/31/EEC and 93/68/EEC).

Page 2
Image 2
Pioneer VSX-416-K, VSX-516-K, VSX-516-S manual Important the Moulded Plug, Operating Environment

VSX-416-K, VSX-516-S, VSX-516-K specifications

The Pioneer VSX-516-S, VSX-516-K, and VSX-416-K are a series of AV receivers that showcase Pioneer's commitment to delivering high-quality home entertainment experiences. These models are designed to cater to both audiophiles and casual listeners, offering a range of features and technologies that enhance audio and video playback.

One of the standout features of the VSX-516 series is its multi-channel amplification, providing robust power for various speaker configurations. Both the VSX-516-S and VSX-516-K boast a 7.1 channel setup while the VSX-416-K offers a 5.1 channel configuration. This allows users to create immersive surround sound environments ideal for movies, music, and video games. The receivers support various audio formats including Dolby Digital and DTS, ensuring high fidelity sound reproduction.

In terms of technologies, these receivers incorporate Advanced Sound Retriever technology. This feature enhances compressed audio files by restoring lost details, making even standard MP3 files sound closer to their original recordings. Additionally, the receivers come equipped with a variety of DSP (Digital Signal Processing) modes, allowing users to select from multiple presets that tailor sound characteristics for different types of content, from concert performances to gaming.

Connectivity is also a significant aspect of the VSX series. The VSX-516-S and VSX-516-K offer multiple HDMI inputs, enabling seamless connection to various high-definition devices such as Blu-ray players and gaming consoles. All models support 1080p video upscaling, providing users with an enhanced visual experience by improving lower resolution content to near HD quality.

The user-friendly interface is another noteworthy characteristic. The on-screen display simplifies navigation through settings and features, making it accessible for users of all technical levels. Each model also includes a remote control for convenient operation, along with a manual setup process for optimizing speaker placement and audio performance.

In conclusion, the Pioneer VSX-516-S, VSX-516-K, and VSX-416-K are versatile AV receivers loaded with features that enhance both audio and visual quality. With their powerful amplification, advanced sound technologies, extensive connectivity options, and user-friendly design, these models are excellent choices for anyone looking to elevate their home entertainment experience. Whether for movies, music, or gaming, these receivers deliver robust performance, making them a valuable addition to any home theater setup.