Manuals / Konica Minolta / Computer Equipment / Network Card

Konica Minolta NC-6 user manual Trademark Acknowledgements, About PageScope Light

Models: NC-6

1 50

Download 50 pages 42.42 Kb

Page 7

1.1Trademark Acknowledgements

1

Welcome

1.1Trademark Acknowledgements

PageScope is trademark of KONICA MINOLTA BUSINESS

TECHNOLOGIES, INC.

Ethernet is a registered trademark of Xerox Corporation.

PCL is a registered trademark of Hewlett-Packard Company.

Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation.

Netscape Communications, the Netscape Communications logo, Netscape Navigator, Netscape Communicator, and Netscape are trademarks of Netscape Communications Corporation.

Novell and NetWare are registered trademarks of Novell, Inc.

All other product names are trademarks or registered trademarks of their respective holders.

Copyright 2003 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.

1.2About PageScope Light

If a network interface card (NIC) is installed, you can use the PageScope Light network utility. PageScope Light is a network utility that allows you to modify network and other settings over the network instead of from the device itself.

All you need in order to use PageScope Light is a Web browser (Internet Explorer or Netscape Navigator) installed on your computer. It is not necessary for any special software to be installed. For instructions on using PageScope Light, refer to “8 Using PageScope Light”.

1-2

NC-6

Image 7

Konica Minolta NC-6 user manual Trademark Acknowledgements, About PageScope Light

Contents

Network Interface Card NC-6 User Manual6 Printing the Configuration Page ContentsChecking the Accessories 4 Connecting the Network Cable9 Appendix 8 Using PageScope LightFor Europe User InstructionsFor the U.S.A For CanadaFor countries not subject to Class B regulations For countries subject to Class B regulationsNC-6 1 Welcome 1.2 About PageScope Light 1.1 Trademark Acknowledgements2 Getting Ready For Windows 95 OSR 2.5/ Windows 98/ Windows 98 SE/ Windows ME 2.1 Selecting the Network Print MethodLPR TCP/IP protocol Windows NT For Windows NTFor Windows IPP PORT9100 TCP/IP protocol Windows XP NetWare client PC Windows computer NetWare serverTCP/IP protocol or IPX/SPX protocol2.2 Checking the Setup Procedures LPR / PORT 9100 Printing IPP Printing NetWare Server/Client NDPS NetWare Server/Client except NDPS3.1 Accessories 3 Checking the AccessoriesNC-6 Checking the Accessories4.2 Connecting the Network Cable 4 Connecting the Network Cable4.1 Types of Cable That Can Be Used NC-6 Connecting the Network Cable5.1 Entering the IP Address From the Control Panel 5 Assigning an IP Address5.2 Assigning an IP Address Check with your network administrator to determine if there is a DHCP server available on the network. If there is, a special IP address will be assigned by the AutoIP function. However, the copier will not be able to communicate with other devices on the network that have had ordinary IP addresses assigned to them. For details about the AutoIP function, refer to “Product Specifications” on page 9-1. Always select “SPECIFY” when there is no DHCP server available Assigning an IP Address 8 Use the 10-key pad and 6 Printing the Configuration Page NC-6 Printing the Configuration Page7.1 Procedures Described in This Chapter 7 Connecting the Computer and Copier7.2.1 Peer-to-Peer Printing 7.2 Setting Up the Network ConnectionsPage NC-6 Connecting the Computer and Copier 10 Click Next 11 Click FinishSetting Up the LPR Connection Installing the Microsoft TCP/IP Printing ServiceWindows NT 7.2.3 Check the IPP Settings Using PageScope Light 7.2.4 IPP PrintingWindows 2000/ Windows XP Page 7.2.5 Connecting a Copier to the NetWare Server 7-10 Setting Up NetWare 4.x/ 5.x/ 6 Remote Printer ModeNC-6 Connecting the Computer and Copier Creating an NDPS Printer Agent Setting Up NetWare 5.x/ 6 Novell Distributed Print Service NDPSSetting Up the Windows Computer for the NetWare Client 7-14 Connecting the Computer and CopierNC-6 8.1 What is PageScope Light? 8 Using PageScope LightHTTP server Access Using PageScope Light http//copierIPaddress 8.3 Accessing PageScope Light8.4 Using PageScope Light 8.2 System RequirementsClick on this to jump to the manufacturer’s Web site 8.5 About the Screen LayoutThis is used to select various setting items or display NC-6Be sure to change the administrator password before using 8.6 Logging In as an Administrator8.7 About the File Download Function The default password for Administrator mode is “sysadm”NC-6 Using PageScope Light9 Appendix 9.1 Product SpecificationsAppendix 9.2 TroubleshootingNC-6 4508-7782-01 Copyright 2003 KONICA MINOLTA BUSINESS TECHNOLOGIES, INCPrinted in China KONICA MINOLTA BUSINESS TECHNOLOGIES, INC