2
Getting Ready
NetWare Server/Client (except NDPS)
1Check that all of the accessories have been included in the package. (“3 Checking the Accessories”)
2Connect the network cable. (“4 Connecting the Network Cable”)
3Specify the settings that enable the copier to connect to the NetWare server. (“7 Connecting the Computer and Copier”)
4Set up the NetWare client so that it can print via the NetWare server. (“7 Connecting the Computer and Copier”)
NetWare Server/Client (NDPS)
1Check that all of the accessories have been included in the package. (“3 Checking the Accessories”)
2Connect the network cable. (“4 Connecting the Network Cable”)
3Specify the IP address, subnet mask, and default gateway settings. (“5 Assigning an IP Address”)
4Print the Configuration Page and check the settings. (“6 Printing the Configuration Page”)
Note
The Configuration Page cannot be printed for copiers that are not equipped with the fax function.
5Specify the settings that enable the copier to connect to the NetWare server. (“7 Connecting the Computer and Copier”)
6Set up the NetWare client so that it can print via the NetWare server. (“7 Connecting the Computer and Copier”)
