Connecting the Network Cable
4 Connecting the Network Cable
Connect the network cable to the copier.
4
4.1Types of Cable That Can Be Used
Use a Category 5 or 5E network cable.
4.2Connecting the Network Cable
Insert the connectors on the network cable into the network ports.
1Insert the connector on one end of the network cable into the network port as shown in the illustration.
2Insert the connector on the other end of the network cable into an available port on the network hub.
LED1
About the LEDs | LED2 |
|
|
| |||
|
|
| |
LED1 (LINK): | This LED lights up when the network cable is | ||
| connected correctly. If this LED is not lit, check | ||
| the connection again, even if the copier appears | ||
| to be connected correctly. If this LED is not lit | ||
| when both ends are connected correctly, the | ||
| network cable may be damaged. | ||
LED2 (ACT): | This LED blinks when data is being transferred. | ||
