Connecting the Computer and Copier
7
5Start up PageScope Light and log in to the Administrator mode, select NetWare Configuration from the “Network” tab, and then use PageScope Light to specify the following settings on the copier.
❍ Refer to “8 Using PageScope Light” for details.
6Load MONITOR.NLM using the NetWare server console.
7From the NetWare Server console, display the print server screen, and check that the printer name entered in step 4 is displayed for Printer 0 and that it is listed as “Waiting for job”.
| NDS | Bindery |
[Enable NetWare] [*] | Enable (Enabled if check box is selected.) | |
|
| |
[Frame Type] [*] | Auto detect (Select the frame type suitable for your network | |
| environment.) |
|
|
| |
[Print Server Name] | Manually enter the name of the print server created in step 4. | |
|
|
|
[NDS Context Name] | The context name for the | No settings required |
| Pserver |
|
|
|
|
[Print Server Password] | (Only specify this setting if it is also set on the NetWare server.) | |
|
| |
[Password Retype] | (Only specify this setting if it is also set on the NetWare server.) | |
|
|
|
[Preferred File Server] | No settings required | The file server name for the |
|
| Pserver |
|
|
|
[Preferred NDS Tree] | The tree name for Pserver | No settings required |
| login |
|
|
|
|
[Print Queue Scan Rate] | 1 (Change as necessary.) |
|
[*] |
|
|
|
|
|
[Connection Mode] | Directory Services | Bindery |
|
|
|
[Mode] [*] | NPrinter |
|
|
|
|
* If changes are made to settings marked with “*”, turn the machine off, then on again.
