English
5. INSTALLATION AND WIRE CONNECTION
Before Installation
1.Before starting, be sure to disconnect the battery’s negative
2.Location
Consider safety and operability when select- ing a place for installation. Avoid the follow- ing.
•Locations where the unit will hamper driving.
•Locations where the unit could injure passen- gers if the car stops suddenly.
•Locations exposed to direct sunlight or hot air from the heater, etc.
•Locations where the unit may be exposed to rain or water.
3.Be sure to use the included screws and brackets. Screws other than those supplied could damage the unit.
CaseCase
Damage
8mm max.
4.When drilling holes in the dashboard, etc., be sure to check beforehand that there are no harnesses or other wires inside.
Accessories
1Mounting bracket | 2 pieces | 3Canoe clip | 4 pieces |
2Mounting screw | 4 pieces | 4CeNET cable | 1 piece |
10 DSH920S