Installation Example (Installing the unit under the driver’s seat)
1. Attach the mounting brackets 1 to the sides of the DSH920S using the screws 2 pro- vided.
2. Select the location on the floor mat. Drill holes in the floor mat to match the positions of the holes in the mounting brackets 1.
3. Insert the canoe clips 3 from the rear of the floor mat and install the DSH920S.
∗There are three mounting holes on each side of the DSH920S. Select the appropriate holes
to match to the installation location.
English
Connection Example and Identification of Parts
1 CeNET input/output terminal | 2 |
Connect to the main unit or CD/MD changer using the CeNET cable 4.
∗Equipment to this terminal is not specified.
2 RCA pin terminal
This terminal is not used for this unit. Use it when the DSC920S (sold separately) is con- nected.
3SATELLITE antenna terminal
1
CeNET cable
Connect to the SIRIUS antenna (SATEL- LITE) cable, (sold separately).
4TERRESTRIAL antenna terminal
Connect to the SIRIUS antenna (TERRES- TRIAL) cable, (sold separately).
5CONTROLLER terminal
This terminal is not used for this unit. Use it when the DSC920S (sold separately) is con- nected.
6POWER SUPPLY terminal
This terminal is not used for this unit. Use it when the DSC920S (sold separately) is con- nected.
7CeNET/STANDALONE switch
This switch is used to select the setting posi- tion when the CeNET connection is made or the DSC920S (sold separately) is connected to this unit (STAND ALONE).
Bottom view of the unit
7
SIRIUS antenna cable
5 6 | 34 |
DSH920S 11