Before Use

POLARIZED PLUG

This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

Clean unit thoroughly. See “To Clean” Section.

NOTE: When first used, your appliance may smoke slightly. Any smoke or odor is normal and will not recur after a few uses.

TO BOIL WATER

NOTE: Do not use for heating oil or butter.

Fill hot pot with the amount of cold water needed or to the Maximum Fill Indicator located on the inside of the unit. Keep hot pot level when filling. Hot pot should always be unplugged when filling with water. Place hot pot on a dry, level, heat resistant surface.

Cover and turn thermostat control dial to High. Plug into 120 volt AC outlet. Water will soon come to a full boil. DO NOT ALLOW TO BOIL DRY. Unplug before emptying water.

To avoid spilling of hot liquid, keep cover in place while pouring. IMPORTANT NOTE: Do not overfill. Do not operate when empty.

CAUTION: This appliance is intended to hold hot or boiling liquids. To avoid burns or other injuries, extreme caution must be used when moving an appliance containing hot or boiling liquids. Keep away from children when operating.

TO HEAT MILK OR CANNED CONVENIENCE FOODS

Place food in unit. Turn thermostat control dial to Low or to desired setting. The use of Low will prevent boil-overs and burning. Plug into 120 volt AC outlet. Allow food/milk to heat, stirring frequently. Unplug before emptying contents. To avoid spilling of hot liquid/ food, keep cover in place while pouring.

Do not scratch the non-stick cook surface with metal implements. Wood or plastic coated spatulas are best. If you use plastic tools, make sure they are suitable for use on hot surfaces.

CAUTION: The appliance and accumulated steam will be hot. Open cover carefully to let steam escape safely.