Dakota Alert PR-3000, Portable Receiver owner manual Alert Mode, Programming the Receiver

Alert Mode

When the PR-3000 receives an alert, the LCD display changes to alert mode. The display will remain in alert mode, showing the most recent alert received until manually reseting to time/date mode. Push the right button to change from the alert mode to the time/date mode.

Programming the Receiver

Push the side and right buttons at the same time to enter the programming mode. There are four different programming screens. Pushing the side but- ton will scroll through the programming screens. The different programming screens are:

1.Time and Date setting

2.Audible tone ON/OFF

3.Vibrate alert ON/OFF

4.Frequency setting

Pushing the side button again after the frequency setting screen will return you to the time/date mode. If no button is pushed in programming mode for 8 seconds the display will automatically return to the time/date mode.

NOTE: The display must be in the time/date mode to access the program- ming screens.

6.