Controlling Volume, Bass, and Treble

Your antenna comes with 10 feet of cable. If that is not sufficient to locate the antenna where there is a strong XM signal, you may purchase a 50-foot cable extension (Delphi model number SA10006) from your SKYFi retailer. Up to two extensions can be used together for up to 110 total feet of cable.

Outdoor Installation or Indoor Wall Mounting

For maximum flexibility and convenience, your XM antenna can also be attached vertically to an external or internal wall.

1.Holding the antenna up, find a wall location that provides a strong signal. It is recommended that you use an extension cord to temporarily locate your Delphi CD Audio System outdoors while optimizing the antenna location with the “Antenna Aiming” screen.

2.Attach four screws to the wall using the screw- locator pattern in Figure 22. (First, photocopy the pattern to use as a template.) Use screws with head sizes small enough to fit in the center of each of the four holes but large enough not to pop out of the elongated sections. #4 pan-head screws (3/8-inch long) are recommended. Leave 1/8 inch of the screw shanks visible between the heads and the wall.

SECTION3	mm)(35in
	1.6 in (40 mm)
	1.4

Figure 22: Screw Locator Pattern

3.Tilt the antenna fully back on its base. Place the antenna base on the four screw heads with the antenna pivot at the top, and pull down approxi- mately 3/8 inch until the base is firmly secured on the wall. (Note that the XM logo will be upside down when the antenna is properly installed.)

4.Tilt the antenna away from the wall/base until

the signal is optimized.

Note: Do not cut the antenna cable and attach alterna- tive connectors or cable. The cable and connectors included with your Delphi CD Audio System are specially chosen to ensure that they will work with XM’s unique frequency band. Use only an XM- approved extension kit (Delphi model number SA10006) with your SKYFi system.

Controlling Volume

Use the volume knob on the SKYFi panel or the Vol+/- keys on the remote control to adjust volume when playing XM Satellite Radio stations.

If you also use your SKYFi Receiver with a SKYFi Vehicle Adaptor or Home Adaptor kit, the SKYFi Receiver will remember the volume level previously set when connected to the Delphi CD Audio System and will return to that setting the next time the sys- tem is used.

Note that the “Line Out” level cannot be reset while the SKYFi Receiver is in the Delphi CD Audio System since the volume control should be used to control the audio output. If the line out setting is adjusted while the receiver is in the SKYFi Vehicle Cradle or

Home Stand and is later reconnected to the Delphi CD Audio System, it will automatically return to the prior setting the next time it is used in the SKYFi Vehicle Cradle or Home Stand.

Bass and Treble

In SKYFi mode, bass and treble can be adjusted by pressing the “Menu” button on the SKYFi Receiver or remote, selecting “Bass + Treble,” and then setting these features in the same manner as other menu functions*.

If the SKYFi Receiver is removed from the Delphi CD Audio System and used in a vehicle or home adaptor, the bass and treble settings on the SKYFi Receiver display will be “flat” or

“zero” since the audio signal will be processed by the vehicle or home audio system. When the SKYFi Receiver is returned to its cradle in the Delphi CD Audio System, it will resume the most recent bass and treble settings.

*Refer to the SKYFi Operating Guide for more specific information on operating your SKYFi Receiver.

SA10034-11B1 specifications

The Delphi SA10034-11B1 is an advanced automotive component that plays a crucial role in modern vehicle systems. Designed for performance and reliability, this product embodies numerous features and technologies that enhance vehicle functionality and safety.

One of the standout characteristics of the SA10034-11B1 is its integration of advanced sensor technology. This component is engineered to provide precise measurements critical for various applications within automotive systems, including engine management, safety systems, and driving assistance technologies. The sensor module is adept at monitoring parameters such as temperature, pressure, and position, enabling it to relay accurate data to the vehicle’s electronic control units (ECUs).

The SA10034-11B1 also boasts exceptional durability. Constructed from high-quality materials, it is designed to withstand harsh environmental conditions typically encountered in automotive applications. This includes resistance to extreme temperatures, moisture, and vibrations, ensuring reliable operation over the lifespan of the vehicle. Its robust design further contributes to reduced maintenance needs and extended service life, making it a cost-effective choice for automotive manufacturers.

In terms of connectivity, the Delphi SA10034-11B1 integrates seamlessly with existing vehicle architectures. This is particularly important in an era where vehicles are increasingly reliant on networked systems. The component supports various communication protocols, allowing for easy integration with other sensors and control modules. This interoperability is vital for modern functions such as automatic braking, adaptive cruise control, and advanced driver assistance systems (ADAS).

Another key feature is the component's energy efficiency. The Delphi SA10034-11B1 is designed to operate with minimal power consumption, reducing the overall energy demands of the vehicle. This characteristic is especially important as manufacturers seek to improve fuel efficiency and minimize the carbon footprint of their vehicles.

Additionally, Delphi emphasizes safety in its designs. The SA10034-11B1 is built to meet rigorous automotive industry standards, ensuring that it performs reliably under critical conditions. This focus on safety not only protects passengers but also enhances the overall performance and reliability of the vehicle.

In summary, the Delphi SA10034-11B1 exemplifies innovation in automotive technology. With its advanced sensors, robust design, seamless connectivity, energy efficiency, and a strong emphasis on safety, it positions itself as a vital component in the evolving landscape of automotive engineering.