Adjusting the Treble Level:
To adjust the treble level:
1.Press the Menu key on the CD panel or remote to show Menu functions on the display.
2.Press the Menu key seven times, then hold to enter the TREBLE submenu.
3.Press the Vol+ key on the CD panel or on the remote to increase treble 1 dB per step to reach a maximum of +10 dB. Press the
Note: If an AM/FM station is weak or noisy, you may want to decrease the treble.
Equalizing Bass and Treble (EQ)
To equalize bass and treble:
1.Press the Menu key on the CD panel or remote to show Menu functions on the display.
2.Press the Menu key four times, then hold to enter the EQ (equalization) submenu.
3.Press +Vol or Vol— on the CD panel or the remote to select one of the EQ auto settings: Flat, Classic, Jazz, Rock, or Pop.
Clock Functions
Setting the Current Time
To set the current time:
1.Press the Menu key on the CD panel or remote to show Menu functions on the display.
2.Press the Menu key once to select the CLOCK submenu. (long press)
3.Press “Memory” on the CD panel or “mem/prog” on the remote to enable the
4.Use the +Vol or Vol— on the CD panel or the remote to adjust the hour .
5.Press “Memory” or “mem/prog.” The minutes will flash in the display.
6.Use the Vol+/— keys to adjust the minutes.
7.Press and hold the Menu key to leave the CLOCK submenu. Or, if 5 seconds elapses with no action, the display will return to normal status.
12:00 AM
AM/PM select
Minutes
Hour
Figure 14: Time-Set Display
Setting the WAKE time
To set the WAKE time
1.Press the MENU key on the CD panel or remote to show MENU functions on the display.
2.Press the MENU key twice, then press the VOL + on
the CD panel or remote to set ALARM ON or press the VOL - on the CD panel or remote to set ALARM OFF.
3.Press and hold the MENU key, then press MENU key to set WAKE. Press MEMORY key to select Minutes or Hour (the Minutes and Hour will flash). Use the VOL + or VOL - on the CD panel or remote to adjust WAKE time. After one hour of the WAKE time, the unit will be automatically turned off, unless any key (except SNOOZE) is pressed.
Using the Snooze Function (Remote Control Only)
When the timer is set to function as an alarm clock, you can use the Snooze key on your remote to stop CD/MP3 playback for
1.Press “snooze” to stop timed play. The unit will play again after 7 minutes. Repeat as necessary.
2.Press any key on the CD panel or remote to dis- able Snooze and turn off the unit.
Programming Sleep Time |
| |
1. Press the Menu key on the CD panel or remote |
| |
to show Menu functions on the display. |
| |
2. Press the Menu key three times to enter the |
| |
SLEEP submenu. |
| |
3. Press the Vol+ key on the CD panel or the remote | SECT | |
to turn sleep time OFF or to program to shut off | ||
| ||
after playing for 30, 60, 90, or 120 minutes. |
| |
SKYFI MODULE | ION | |
With the Delphi CD Audio System and your XM | ||
SKYFi Receiver (Delphi model number SA10000, | 3 | |
sold separately), it’s easy to enjoy XM Satellite | ||
| ||
Radio programming wherever you go! (Subscription |
| |
required. Visit www.xmradio.com for details.) |
| |
|
| |
For SKYFi operation*: |
|
1.Rotate the central unit so that the SKYFi cradle faces forward. Be sure to follow the arrows when rotating the unit. Complete the rotation until the unit locks in position. CAUTION: Do not use excessive force, which could damage the unit.
2.Connect the XM antenna to the antenna jack.
The
*Refer to the SKYFi Operating Guide for more specific information on operating your SKYFi Receiver.
7