Delphi SKYFI3 Indoor Installation on a Flat Surface, Outdoor Installation or Indoor Wall Mounting

Page 24

Setting Up the Antenna

Indoor Installation on a Flat Surface

To aim your antenna at the satellite:

1.Set antenna flat against its base on a flat (horizontal) surface.

2.Turn the base of the antenna so that the XM logo is facing to the south.

3.Use the “Antenna Aiming” screen to optimize antenna tilt angle and position.

4.If necessary, experiment with different locations near a south-facing window or outdoors.

Your antenna comes with 20’ of cable. If that is not sufficient to locate the antenna where there is a strong XM signal, purchase the Delphi XM Signal Repeater (Delphi model number SA10116) from your retailer or www.xmradio.ca.

There is also a 50’ extension cable for the antenna (SA10006) that is sold separately.

Outdoor Installation or Indoor Wall Mounting

The antenna can also be attached vertically to an external or internal wall if that is more convenient than placing it on a horizontal surface.

1.Holding your antenna up, find a wall location that ensures a strong signal. It is recommended that you use an extension cord to temporarily locate your receiver’s home stand outdoors while optimizing the antenna location with the “Antenna Aiming” screen.

20

Page 23 Page 25
Image 24
Page 23 Page 25
Contents User Guide Page Owner’s Record Delphi Premium Sound System Controls Need help? Table of Contents Welcome About DelphiAbout XM Satellite Radio What’s In the Box Items in the boxSetting Up the System Installing the Radio Cradle Power Up the System Using SKYFi3 with Delphi Premium Sound System Getting Started Using MyFi with Delphi Premium Sound System Getting Started Using Roady XT with Delphi Premium Sound System Getting Started Using an Audiovox Receiver with Delphi Premium Sound System Getting Started Using the Delphi Premium Sound System with Batteries System does not charge rechargeable batteriesBack Cover Battery Switch Setting Up the Antenna Optimizing Antenna Position/SignalPositioning the Antenna Indoor Installation on a Flat Surface Outdoor Installation or Indoor Wall MountingTo aim your antenna at the satellite Setting Up the Antenna Setting Up the Antenna Repeater Antenna Volume Headphones Bass BoostAux Input To help avoid hearing loss or damage, do the followingPrecautions On power sourcesOn placement Troubleshooting If the power is not onDo not immerse in water Maintenance If there is no audioSpecifications Warranty Delphi Limited Consumer Warranty United StatesHow you the Customer can get service How state law relates to the warrantyDelphi Limited Consumer Warranty Canada Warranty Warranty Delphi Corporation
Top Page Image Contents