Proctor-Silex 994 To remove, clean, and replace the cutter assembly, To sanitize and dry the jar

Page 9

840065000-1ENv01 9/27/04 11:26 AM Page 9

Caring for the Blender

To remove, clean, and replace the cutter assembly

WARNING:

Do not disassemble the

cutter assembly.

1.Position the tool (supplied) over the cut- ter assembly inside the jar. The tabs on both ends of the tool fit inside the vanes on the jar. Push tool as far down as it will go. If the cutter assembly can still rotate when turning the coupling, turn the coupling slightly until the tool seats on the cutter assembly and it can no longer move.

2.While holding the tool with one hand, turn the coupling counterclockwise with the other hand to loosen the coupling. Remove coupling.

3.Using a wrench, turn the locking nut counterclockwise to loosen and remove the nut.

4.Carefully remove the cutter assembly and O-ring from inside the jar.

 

Tool

 

Knife

O-ring

assembly

 

Container

Locking nut

Coupling

Align notch with tab

WARNING:

Cutter blades are sharp; to reduce

the risk of personal injury, use

caution when handling.

5.Carefully clean the cutter assembly and O-ring using hot soapy water. Rinse and dry.

6.Reassemble the cutter assembly in reverse order. Make sure the notch on the cutter assembly aligns with the tab in the jar bottom.

To sanitize and dry the jar

1.Fill the jar with 1⁄2 gallon (1.9 liters) sanitizing solution and place on machine base. Replace cover and dosing cup, and run on speed “5” for five seconds. Empty jar. Remove any remaining

moisture from the cutter assembly by replacing the empty jar and cover on machine base and running on speed “5” for five seconds.

2.Wipe down the jar exterior with a soft cloth or sponge dampened with sanitizing solution.

3.Sanitize cover and dosing cup by immersing in sanitizing solution for two minutes.

4.Do not rinse jar, cover, or dosing cup after sanitizing, but allow to air dry.

To clean machine housing

1.Do not immerse or use high pressure hos- ing equipment to clean the machine base.

2.Wipe the exterior of the machine with a damp cloth or sponge.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Model Blender Your safety and the safety of others is very important Blender SafetyImportant Safety Instructions Parts and Features Setup Setup and Operation ChecksOperation Blender ChecksOperating the Blender Special Blending Instructions Using the dosing cupFilling the jar Blending hot mixturesCleaning Instructions General cleaningTo wash and rinse jar To remove, clean, and replace the cutter assembly To clean machine housingTo sanitize and dry the jar Troubleshooting Guide MaintenanceReplacement Parts Requesting Assistance or Service Product WarrantyVotre sécurité et celle des autres, c’est très important La sécurité du mélangeurConserver CES Instructions Composants et caractéristiques Utilisation PréparationPréparation Inspection du mélangeur ContrôleUtilisation du mélangeur Remplissage du récipient Techniques d’utilisation spécialesUtilisation du bouchon-doseur Mixage d’un mélange chaudInstructions de nettoyage Nettoyage généralLavage et rinçage du récipient Dépose, nettoyage et réinstalla Instructions de nettoyage suiteTion du module des lames Nettoyage du carénage de l’appareil Nettoyage sanitaire et séchage du récipientGuide de dépannage EntretienPièces de rechange Garantie du produit Pour contacter notre centre de service-client, téléphoner au840065000

994 specifications

The Proctor-Silex 994 is a versatile and efficient kitchen appliance designed to streamline various cooking processes in home kitchens. Known for its reliability and user-friendly interface, this multifunctional product combines innovative technology with robust features to cater to the needs of modern culinary enthusiasts.

One of the standout characteristics of the Proctor-Silex 994 is its powerful heating element, which ensures rapid and even heating, making it suitable for a wide range of cooking tasks from toasting and baking to broiling. This appliance offers multiple cooking options, allowing users to prepare meals with precision and ease. It comes equipped with an adjustable temperature control, enabling cooks to set the perfect heat level for different types of food, whether it be delicate pastries or hearty casseroles.

The design of the Proctor-Silex 994 emphasizes its space-saving capabilities. Compact yet functional, it can fit easily on countertops without occupying excessive space, making it perfect for small kitchens or limited cooking areas. Additionally, the aesthetic appeal of the device makes it a pleasing addition to any kitchen décor.

Another significant feature of this appliance is its ease of cleaning. The removable parts are dishwasher-safe, ensuring that the upkeep of the Proctor-Silex 994 is straightforward and hassle-free. This promotes a clean cooking environment and enhances food safety, as maintaining cleanliness is pivotal in any culinary setting.

Technologically, the Proctor-Silex 994 showcases advancements that enhance the cooking experience. It features an intuitive control panel with clear indicators, allowing users to monitor cooking times and temperatures effortlessly. Many users appreciate the programmable settings, which enable them to set the appliance to cook while multitasking in the kitchen.

Safety is a top priority in the design of the Proctor-Silex 994. The appliance is built with thermal protection features that prevent overheating, ensuring safe operation for users of all experience levels. Additionally, non-slip feet provide stability while in use, reducing the risk of accidents.

In summary, the Proctor-Silex 994 is an essential addition to any kitchen, offering a blend of efficiency, versatility, and modern technology. Its powerful heating capabilities, ease of use, and safety features make it a preferred choice for home cooks seeking reliable performance in their culinary endeavors.
Top Page Image Contents