Oster Wine Kit warranty Operating Instructions, Installing the Batteries, Remove the battery cover

Operating Instructions

Installing the Batteries

Before using your Wine Opener for the first time install a fresh set of batteries in the battery compartment as follows:

1Remove the battery cover

2Insert 4 AA alkaline batteries into the battery compartment, observing proper +/- polarities

3Replace the battery cover

4Replace batteries when required with only AA alkaline batteries.

5Dispose old batteries per local and national laws and regulations.

To Operate Your

Electric Wine Opener

The Wine Opener is operated
by the simple press of a
switch. Press the lower switch	Up
to remove a cork from a
bottle. Press the upper switch
to release a cork from the	Down
mechanism after you have
removed from the bottle.
(Figure 1)

Figure 1

Before removing the cork you must remove any foil from the bottle using the foil cutter provided. (Figure 2)

1Place the Wine Opener on top of the wine bottle making sure that it remains as upright as possible at all times. If you hold the Wine Opener at an angle to the bottle it will not remove the cork properly. (Figure 3)

2Hold the Wine Opener firmly and depress the lower part of the switch. The corkscrew spiral will turn in a clockwise direction and enter the cork, then gradually remove it from the bottle. When the Wine Opener mechanism has stopped the cork has been fully removed from the bottle.

Figure 2

Figure 3

6 www.oster.com www.oster.com 7