Oster 124828, 3168 user manual Problems and Solutions, Problem Solution

PROBLEMS AND SOLUTIONS

PROBLEM	SOLUTION
Juice Extractor will not work	• Safety locking arm may not be locked properly in
after switching on “I”	its position
	• Turn off and unplug unit and ensure all parts are
	assembled properly
	• Turn off and unplug unit and check if there are any
	residues blocking the unit
Motor makes loud noise and	• Turn off and unplug unit and ensure all parts are
	assembled properly
unit starts vibrating
	• Juicing overripe fruits may produce too much pulp
	and clog the filter. Turn off and unplug unit and
	clean the filter thoroughly
Motor appears to stall when	• If pulp starts building up under the lid, slow down
juicing	the juicing process. Turn off and unplug unit and
	clean the filter basket, the stainless steel filter and
	the lid
Too much pulp build up on	• Follow the instructions to disassemble the unit
stainless steel filter	included in the “After Using Your Juice Extractor”
	section. Clean up pulp from the filter
Pulp too wet and reduced	• Try a slower juicing action by pushing the food
juice extraction	pusher down slower. Remove stainless steel
	mesh filter and thoroughly clean mesh with a nylon
	brush. Rinse the filter basket with hot water. If the
	fine mesh holes are blocked, soak the basket in a
	solution of hot water with 10% lemon juice to
	unblock the holes or wash in the dishwasher. This
	will remove excess fiber build up (from fruit or
	vegetables), which could be reducing the flow of
	juice
Juice leaks between the rim	• Try a slower juicing action by pushing the food
of the Juicer and Cover	pusher down slower
the Filter.

8