Using Your Product Control Panel

A.Speed Dial – Turn dial clockwise to choose from manual speed settings from “Low” to “High”. Once you select a speed, the blender will run until you turn it back to “Off.”

B.Programmed Settings – In order to activate the programmed buttons, first turn the speed dial counter-clockwise to the Programmed/Pulse Setting. Then select the programmed button you would like to use.

They have been developed for optimal use when blending those types of foods.

Soup: 20 second ramp up to “Medium”, 5 minutes on “High”.

Dips/Spreads: 2 (10-second) pulses at “Medium-low”, 30 seconds on “High”.

Smoothie: 10 seconds to ramp up to “Medium”, 20 seconds on “High”.

NOTE – if you would like to stop the blender in the middle of a programmed cycle, simply press any button.

C.Pulse – Turn the speed dial counter-clockwise to the Programmed/ Pulse Setting. Then press the “Pulse” button for the desired time.

D.LED Lights – the lights around the selected programmed buttons will pulse when the unit is operating in that mode.

E.Flashing Light – When speed dial is turned to the Programmed/Pulse setting, the Pulse button light will flash red to indicate the unit is ready to operate. Warning: Flashing light indicates ready to operate. Do not touch the blade.

E C

OFF

PROGRAMMED

PULSE

	PROGRAMMEDSETTINGS
Pulse	Smoothie	Soup	Dips/
			Spreads

B D