Learning about your oster 4 slice Waffle Maker

learning about your oster 4 slice Waffle Maker

c d

a	Non-Stick Cooking Grids	c	Power Indicator Light
b	Closure Latch	d	Ready Light

Before The First Use

1Remove all packaging materials before using

2Before using, wipe down the 4 slice waffle maker with a clean, damp cloth and dry. Be sure to read the Care and Cleaning section of this manual to learn the correct methods for cleaning the unit.

How To:

Using Your OSTER® 4 Slice Waffle Maker

Preparing Your 4 Slice Waffle Maker

1Close the waffle maker and plug it into the wall outlet, you will notice that the red power indicator light will turn on. It will take approximately 5 to 8 minutes to reach baking temperature. When the Green Ready Light goes ON, the waffle maker is ready for use.

2Before baking the first waffles of the day, use a pastry brush to lightly coat the top and bottom waffle grids with vegetable oil. A light coating of non-stick cooking spray also works well.

Baking

1When the green “Ready” indicator light goes ON, the unit has reached the correct baking temperature and is ready for use.

2Pour batter onto bottom grid of waffle maker. Ladle just enough batter to fill each plate in the lower grid so that the peak area of the grid is covered, being careful not to overfill. If necessary, use a spatula to spread the batter in to the corners of the grid.

3Lower the top part without closing the latch. This will allow more room for the waffles to expand.

Note: During cooking, the ready light may cycle ON and OFF as the unit maintains the correct baking temperature. The cooking time is about 4 to 6 minutes and varies depending on the type of batter being used and desired cooking consistency of waffle. The unit may start to emit steam during cooking. Once the unit stops emitting any steam, this may be an indicator that the waffles are done.