Salton JE-1013 manual How to Clean

Page 9

How to Clean

1.Move the Control Switch to the Off position and wait for the motor to stop completely.

2.Unplug from the wall outlet.

3.Disassemble the Juicer (see directions on page 8)

4.Clean the Pulp Container, Pulp Chute/Juicer Cover, Food Pusher, Stainless Steel Juice Collector, Juice Jug and Froth Separator in warm, soapy water. A mild detergent is recommended. Rinse well and dry thoroughly.

NOTE: Care must be taken when cleaning or storing the Pulp Container with Safety Foot.

5.Hold the Stainless Steel Strainer Basket/Cutting Blades under clean running water. Use the cleaning brush included with the Juicer to gently clean away pulp from the filter and cutting blades. Rinse under running water. Hold the Strainer Basket/Cutting Blades up to the light to ensure that the fine mesh holes are not blocked. If the holes are blocked, soak the Strainer Basket/Cutting Blades in hot water to loosen the pulp and clean with the nylon brush again. Allow to dry on a cloth or paper towel before reassembling the juicer.

CAUTION: THE CUTTING BLADES ARE VERY SHARP.

6.Wipe the Motor Housing with a soft cloth moistened in warm soapy water. NEVER IMMERSE MOTOR HOUSING WATER OR ANY OTHER LIQUID.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Professional juice extractor Or mechanical adjustment. See Warranty Do not use outdoorsAvoid contacting moving parts Grounded Plug Before First USEOr use an adaptor Off Lo speed Locking handle Motor HousingPulp Chute/Juicer Cover Feed Tube Food Pusher Spout Juice JugJuice Collector. See Ill HOW to Assemble the JuicerWill not operate Place the Juice Jug or a glass under the spout Ill.1HOW to Prepare Fruit and Vegetables for Juicing HOW to JuiceHelpful Hints How to Disassemble the Juicer Care and CleaningRemove the Food Pusher from the Feed Tube Remove the Juice JugHow to Clean Problem Solution TroubleshootingApple Strawberry Juice RecipesApple Veggie Juice Fruit & Vegetable CocktailSalton Canada Limited Warranty
Top Page Image Contents