2.Remove the display assembly.
3.Remove the keyboard assembly.
4.Remove the palmrest assembly.
5.Remove the three M2 x
6.Slide the touch pad assembly out from under the two
7.Remove the touch pad assembly from the palmrest assembly.
8.Disconnect the flex cable from the ZIF connector on the back of the touch pad (see Figure 16).
The flex cable remains attached to the touch pad holder assembly.
Bottom Assembly
fan
speaker (shown with audio EMI shield removed)
main battery compartment
system board assembly
Figure 17. Bottom Assembly
modem
main battery release latch location
reserve battery
bottom case cover
The bottom assembly consists of the following
•Reserve battery
•Main battery
•Modem
•Fan assembly
•Speaker
•System board assembly
•Main battery release latch
•Bottom case assembly
22 Dell Latitude L400 Service Manual