To replace the modem, perform the following steps:
1.Connect the modem cable to the connector on the system board.
2.Align the connector on the bottom of the modem with the connector on the system board, and carefully press the modem onto the system board.
3.Put the modem retainer bracket in place.
4.Reinstall the M2 x
5.Reinstall the two IDE connector screws at both ends of the IDE (modular bay) connector located on the back of the bottom assembly.
6.Reinstall the four
7.Reinstall the palmrest assembly.
8.Reinstall the keyboard assembly.
9.Reinstall the display assembly.
10.Reinstall the keyboard bezel.
Fan
M2 x
fan
connector
Figure 20. Fan Removal
1.Remove the keyboard bezel.
2.Remove the display assembly.
3.Remove the keyboard assembly.
support.dell.com | Dell Latitude L400 Service Manual | 25 |