Dell T1700 owner manual Installing the Input/Output I/O Panel, Removing the System Board

Page 25

Installing the Input/Output (I/O) Panel

1.Insert the I/O panel into the slot on the chassis front.

2.Slide the I/O panel towards the right of the computer to secure to the chassis.

3.Tighten the screw to secure the I/O panel to the chassis.

4.Thread the I/O panel, data cable and USB data cable into the chassis clip.

5.Connect the I/O panel, data cable and USB data cable to the system board.

6.Install :

a)front bezel

b)cover

7.Follow the procedures in After Working Inside Your Computer.

Removing the System Board

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the:

a)cover

b)memory

c)expansion card(s)

d)heat-sink assembly

e)processor

3.Disconnect all the cables connected to the system board.

4.Remove the screws that secure the system board to the computer and slide the system board towards the front of the computer.

25

Image 25
Contents Regulatory Model D13M Regulatory Type D13M001 Dell Inc Contents Using The System Setup Program And Boot Manager Installing the Input/Output I/O PanelSpecifications Contacting Dell Before Working Inside Your Computer Working on Your ComputerAfter Working Inside Your Computer Turning Off Your ComputerClick Shut Down Removing the Cover Recommended ToolsRemoving the Intrusion Switch Installing the CoverRemoving the Wireless Local Area Network Wlan Card Installing the Intrusion SwitchInstalling the Front Bezel Installing the Wireless Local Area Network Wlan CardRemoving the Front Bezel Removing the Expansion CardMemory Module Guidelines Installing the Expansion CardRemoving the Coin-Cell Battery Installing the MemoryRemoving the Memory Removing the Hard Drive Installing the Coin-Cell BatteryRemoving the Optical Drive Installing the Hard DriveInstalling the Optical Drive Removing the Power Supply Installing the SpeakerRemoving the Speaker Page Removing the Heat Sink Assembly Installing the Power SupplyInstalling the Heat Sink Assembly Removing the ProcessorRemoving the System Fan Installing the ProcessorRemoving the Thermal Sensor Installing the System FanPage Removing the Power Switch Installing the Thermal SensorInstalling the Power Switch Removing the Input/Output I/O Panel Removing the System Board Installing the Input/Output I/O PanelIntrusion switch connector PCI Express x16 slot wired asSystem Board Components Pin power connector Password reset jumper Sata connectors Installing the System BoardHDD and optical drive power connector Page Following table displays the system setup navigation keys Boot SequenceNavigation Keys System Setup Options Option Description Enable Smart Reporting This option is disabled by default Reporting Technology specificationUSB Configuration These settingsTPM Acpi Support OptionDescriptionTPM PPI Deprovision Override TPM PPI Provision OverrideAdmin Setup Lockout This option is set to Enable by defaultOption is disabled by default. The options are Reset All Keys- Resets to default settingEnable Cpuid Limit this option is disabled by default Enabled by defaultHard Disk Configuration or partition have been changed Memory capacity over 8GB installedKeyboard Errors Is enabled by defaultTechnology Smart ConnectionEnable MEBx Hotkey This option is enabled by default BootsBy default Direct I/O must be enabled to use this featureUpdating the Bios System and Setup Password Jumper SettingsClick Drivers & Downloads ComputerDisabling a System Password Follow the procedures in Before Working on Your Computer DiagnosticsAmber LED State White LED State Description Troubleshooting Your ComputerPossible USB failure No memory modules are detectedOverride Jumper is Removed Installed Amber LED State Description Possible system board errorPossible system board resource and/or hardware failure Some other failure with messages on screenData error Error Message DescriptionFailure Configuration ProblemDisk error Error Message Description Memory data lineNot a boot diskette System installed on it. Insert a bootable floppy diskWrite fault Error MessageWrite fault on Selected driveSpecification FeatureFeature Specification Processor typeIntegrated Externally Accessible 5.25-inch drive baySystem chipset Intel C226 chipset DMA Channels ChannelsMini-Tower Two Four Small Form Factor One Inch Sata drive baysWhite light indicates sleep state of the computer Front of the computer Power button lightDrive activity light Reading data from or writing data to the hard drivePhysical Height Width Depth Weight Power Wattage Maximum Heat Dissipation VoltageFeature Specification Contacting Dell
Related manuals
Manual 59 pages 9.37 Kb Manual 2 pages 1.33 Kb

T1700 specifications

The Dell T1700 is a versatile workstation designed for professionals in need of robust performance and reliability. Positioned as an entry-level workstation, the T1700 caters to a range of industries, including engineering, architecture, and media production. It is engineered to provide powerful processing capabilities, making it suitable for demanding applications.

One of the primary features of the Dell T1700 is its support for Intel's latest processors. The workstation can be configured with quad-core and six-core Intel Xeon processors, offering exceptional computational power for multitasking and resource-intensive applications. This capability allows professionals to handle complex datasets and run simulations efficiently, ensuring productivity remains high.

Storage is another significant aspect of the Dell T1700. It offers multiple storage options, including solid-state drives (SSDs) and traditional hard disk drives (HDDs). This flexibility enables users to choose configurations that align with their performance needs and budget. The ability to incorporate both SSDs for speed and larger capacity HDDs for data storage is particularly beneficial for users working with large files, such as high-resolution images and 3D models.

In terms of graphics, the T1700 can be equipped with professional-grade graphics cards from NVIDIA and AMD, enhancing its capability to handle graphics-intensive tasks. These graphics options make the workstation suitable for CAD applications, video editing, and 3D rendering, where high-quality visuals and rendering speed are critical to success.

Connectivity is another hallmark of the Dell T1700. The workstation features several USB ports, including USB 3.0, and multiple expansion slots that allow users to customize their systems based on specific needs. This level of expandability ensures that the T1700 can adapt over time, accommodating new hardware and technologies as they emerge.

Moreover, the Dell T1700 is designed with maintainability in mind. Its tool-less chassis allows for easy upgrades and replacements of components, streamlining the maintenance process. This feature is especially important in professional environments where downtime needs to be minimized.

Overall, the Dell T1700 stands out as a reliable, flexible, and powerful workstation. Its robust performance, extensive configuration options, and user-friendly design make it an ideal choice for professionals seeking to enhance their workflow and tackle demanding projects with confidence.