Dell T1700 Technology, Smart Connection, Numlock LED, Is enabled by default, Keyboard Errors

Page 36

OptionDescription

Select Days - The system will power up on days selected above at the time you specified above.

NOTE: This feature does not work if you turn off your computer using the switch on a power strip or surge protector or if Auto Power is set to disabled.

Deep Sleep Control

Allows you to define the controls when Deep Sleep is enabled.

Disabled

Enabled in S5 only

Enabled in S4 and S5

Fan Control Override

USB Wake Support

Wake on LAN

This option is disabled by default.

Controls the speed of the system fan. This option is disabled by default. NOTE: When enabled, the fan runs at full speed.

This option allows you to enable USB devices to wake the computer from standby.

Enable USB Wake Support - This option is disabled by default.

This option allows the computer to power up from the off state when triggered by a special LAN signal. Wake-up from the Standby state is unaffected by this setting and must be enabled in the operating system. This feature only works when the computer is connected to AC power supply. The options differ based on the form factor.

Disabled - Does not allow the system to power on by special LAN signals when it receives a wake-up signal from the LAN or wireless LAN.

LAN Only - Allows the system to be powered on by special LAN signals.

WLAN Only - Allows the system to be powered on by special WLAN signals. (For Ultra Small Form Factor only)

LAN or PXE Boot - Allows the system to be powered on by special LAN or PXE Bootsignals. (For Ultra Small Form Factor only)

 

This option is Disabled by default.

Block Sleep

This option lets you block entering to sleep (S3 state) in operating system

 

environment.

 

Block Sleep (S3 state) - This option is disabled by default.

Intel Smart Connect

The option is disabled by default. If option enables will periodically sense nearby

Technology

wireless connection while the system is asleep. It will synchronize emails or social

 

media application that were open when system entered the sleep state.

 

• Smart Connection

Table 8. POST Behavior

 

 

 

Option

Description

 

 

Numlock LED

Specifies if the NumLock function can be enabled when the system boots. This option

 

is enabled by default.

Keyboard Errors

Specifies whether keyboard related errors are reported when it boots. This option is

 

enabled by default.

36

Image 36
Contents Regulatory Model D13M Regulatory Type D13M001 Dell Inc Contents Installing the Input/Output I/O Panel Using The System Setup Program And Boot ManagerSpecifications Contacting Dell Working on Your Computer Before Working Inside Your ComputerTurning Off Your Computer After Working Inside Your ComputerClick Shut Down Recommended Tools Removing the CoverInstalling the Cover Removing the Intrusion SwitchInstalling the Intrusion Switch Removing the Wireless Local Area Network Wlan CardInstalling the Wireless Local Area Network Wlan Card Installing the Front BezelRemoving the Front Bezel Removing the Expansion CardInstalling the Expansion Card Memory Module GuidelinesInstalling the Memory Removing the Coin-Cell BatteryRemoving the Memory Installing the Coin-Cell Battery Removing the Hard DriveInstalling the Hard Drive Removing the Optical DriveInstalling the Optical Drive Installing the Speaker Removing the Power SupplyRemoving the Speaker Page Installing the Power Supply Removing the Heat Sink AssemblyInstalling the Heat Sink Assembly Removing the ProcessorInstalling the Processor Removing the System FanInstalling the System Fan Removing the Thermal SensorPage Installing the Thermal Sensor Removing the Power SwitchInstalling the Power Switch Removing the Input/Output I/O Panel Installing the Input/Output I/O Panel Removing the System BoardPCI Express x16 slot wired as Intrusion switch connectorSystem Board Components Installing the System Board Pin power connector Password reset jumper Sata connectorsHDD and optical drive power connector Page Boot Sequence Following table displays the system setup navigation keysNavigation Keys System Setup Options Option Description Reporting Technology specification Enable Smart Reporting This option is disabled by defaultUSB Configuration These settingsOptionDescription TPM Acpi SupportTPM PPI Deprovision Override TPM PPI Provision OverrideThis option is set to Enable by default Admin Setup LockoutOption is disabled by default. The options are Reset All Keys- Resets to default settingEnabled by default Enable Cpuid Limit this option is disabled by defaultHard Disk Configuration or partition have been changed Memory capacity over 8GB installedIs enabled by default Keyboard ErrorsTechnology Smart ConnectionBoots Enable MEBx Hotkey This option is enabled by defaultBy default Direct I/O must be enabled to use this featureUpdating the Bios Jumper Settings System and Setup PasswordClick Drivers & Downloads ComputerDisabling a System Password Diagnostics Follow the procedures in Before Working on Your ComputerTroubleshooting Your Computer Amber LED State White LED State DescriptionPossible USB failure No memory modules are detectedAmber LED State Description Possible system board error Override Jumper is Removed InstalledPossible system board resource and/or hardware failure Some other failure with messages on screenError Message Description Data errorFailure Configuration ProblemError Message Description Memory data line Disk errorNot a boot diskette System installed on it. Insert a bootable floppy diskError Message Write faultWrite fault on Selected driveFeature SpecificationFeature Specification Processor typeExternally Accessible 5.25-inch drive bay IntegratedSystem chipset Intel C226 chipset DMA Channels ChannelsInch Sata drive bays Mini-Tower Two Four Small Form Factor OneFront of the computer Power button light White light indicates sleep state of the computerDrive activity light Reading data from or writing data to the hard drivePower Wattage Maximum Heat Dissipation Voltage Physical Height Width Depth WeightFeature Specification Contacting Dell
Related manuals
Manual 59 pages 9.37 Kb Manual 2 pages 1.33 Kb

T1700 specifications

The Dell T1700 is a versatile workstation designed for professionals in need of robust performance and reliability. Positioned as an entry-level workstation, the T1700 caters to a range of industries, including engineering, architecture, and media production. It is engineered to provide powerful processing capabilities, making it suitable for demanding applications.

One of the primary features of the Dell T1700 is its support for Intel's latest processors. The workstation can be configured with quad-core and six-core Intel Xeon processors, offering exceptional computational power for multitasking and resource-intensive applications. This capability allows professionals to handle complex datasets and run simulations efficiently, ensuring productivity remains high.

Storage is another significant aspect of the Dell T1700. It offers multiple storage options, including solid-state drives (SSDs) and traditional hard disk drives (HDDs). This flexibility enables users to choose configurations that align with their performance needs and budget. The ability to incorporate both SSDs for speed and larger capacity HDDs for data storage is particularly beneficial for users working with large files, such as high-resolution images and 3D models.

In terms of graphics, the T1700 can be equipped with professional-grade graphics cards from NVIDIA and AMD, enhancing its capability to handle graphics-intensive tasks. These graphics options make the workstation suitable for CAD applications, video editing, and 3D rendering, where high-quality visuals and rendering speed are critical to success.

Connectivity is another hallmark of the Dell T1700. The workstation features several USB ports, including USB 3.0, and multiple expansion slots that allow users to customize their systems based on specific needs. This level of expandability ensures that the T1700 can adapt over time, accommodating new hardware and technologies as they emerge.

Moreover, the Dell T1700 is designed with maintainability in mind. Its tool-less chassis allows for easy upgrades and replacements of components, streamlining the maintenance process. This feature is especially important in professional environments where downtime needs to be minimized.

Overall, the Dell T1700 stands out as a reliable, flexible, and powerful workstation. Its robust performance, extensive configuration options, and user-friendly design make it an ideal choice for professionals seeking to enhance their workflow and tackle demanding projects with confidence.