Audiovox XM-RCV specification

PROCEDURE FOR A TYPICAL BRACKET INSTALLATION OF THE SCU

(Bracket not supplied)

Audiovox suggests this type of installation over the Hook & Loop type of installation though the Hook & Loop installation (if done correctly) is a secure and sufficient mounting option. Installation of the SCU using a bracket results in a professional, factory-installed look, without visibly damaging the interior of the vehicle. When combined with the optional Trim Ring (model #SAT-PF) the results are further cosmetically en- hanced. There are several types of brackets available to accomplish this type of installation.

The installation procedure that follows, illustrates the use of a Pro.Fit® mounting bracket. Audiovox has found that the Pro.Fit® VSM® line of mounting brackets are easy to install and compliments the installation of the SCU as well as being a perfect match to the optional Trim Ring (model #SAT-PF). Pro.Fit® VSM® mounting bracket reduce the installation liability while maintaining the resale value of a car because of the professional fit, professional look and safe design.

Currently Pro.Fit® VSM® offers hundreds of brackets, covering most popular cars, vans, and trucks. Step- by-step instructions and technical support are available for every mount and application.

After the proper mounting bracket has been selected and installed using the Original Manufacturers installation instructions, proceed with the following steps:

1.Feed the SCU Cable through the hole in the Trim Ring (optional) and connect it to the RF Modulator.

2.Using the Phillips Head Screws and the External Tooth Lock Washers (supplied), Mount the SCU to the bracket as shown in the Figure below.

NOTE: Use caution not to over tighten the screws into the back of the SCU as this may cause damage to the unit.

NOTE: Do not install the unit in the following locations:

In Locations exposed to direct sunlight. Where hot air is discharged from the car heater. In areas subject to extreme temperatures.

(Example installation position)

Phillips Round Head Screw (4mm x 8mm)

AUDIO OX

1	2	3
4	5	6
7	8	9
	0
	SFT

External Tooth Washer (4mm int.)

Bracket

(Not Supplied)

Bracket Shown is a PRO.FIT for ordering information

visit www.pro-fit-intl.com

SCU

Trim Ring

(Not Supplied, Model #SAT-PF)

For ordering information call Audiovox Electronics toll-free telephone assis-

tance line at 1-800-645-4994or contact us via the web:

www.audiovox.com

Upon completion of the SCU installation and before the XM radio is activated a test of the system should be performed. To verify that the SRXM-001 system and the antenna have been installed correctly and are functioning, select and listen to CH 1. (XM preview channel). If there is no power to the SCU check that all connections have been made and that fuses are good. If there is no signal present, make sure that the antenna is unobstructed (move vehicle) and check the antenna cable connection to the RF Modulator. For a detailed trouble-shooting guide, refer to the Owner’s Manual.

128-6213A

XM-RCV specifications

The Audiovox XM-RCV is a cutting-edge device tailored for SiriusXM satellite radio listeners, providing an expansive range of entertainment options. As a compact receiver, the XM-RCV integrates advanced technologies and features designed to enhance the overall listening experience, making it a popular choice among audio enthusiasts.

One of the standout features of the Audiovox XM-RCV is its ability to deliver over 170 channels of satellite radio, including commercial-free music, sports, news, and talk shows. This diverse selection caters to various tastes and preferences, allowing users to enjoy a truly personalized listening experience. The XM-RCV is compatible with multiple audio systems, which means users have flexibility in choosing how they want to experience their favorite content.

The device also boasts advanced signal processing technology that ensures high-quality sound delivery. With a built-in digital signal processor, the Audiovox XM-RCV minimizes interference and enhances audio clarity, providing a rich listening experience. This technology is especially valuable for users in urban environments or areas with challenging reception conditions.

Another significant characteristic of the XM-RCV is its user-friendly interface. Featuring an easy-to-read LCD display, the device allows for quick navigation between channels and simple access to additional information like artist names and song titles. The intuitive controls make it easy for users to toggle their listening preferences, whether they prefer music, sports commentary, or talk radio.

The design of the Audiovox XM-RCV is compact and sleek, making it easy to install and transport. Its lightweight build means it can easily be integrated into a car audio system or used in a home setup. The receiver includes various mounting options and accessories, ensuring a hassle-free installation process that accommodates a range of applications.

In terms of connectivity, the XM-RCV supports both analog and digital outputs, making it versatile for any audio system. The ability to connect to a wide array of devices ensures users can enjoy their SiriusXM subscriptions without limitations.

In conclusion, the Audiovox XM-RCV satellite radio receiver combines versatility, ease of use, and advanced technology to deliver an exceptional audio experience. With its extensive channel offerings, superior sound quality, and user-friendly features, it represents a compelling option for anyone looking to elevate their audio enjoyment.