SRXM-001 System Component Layout, Ground Black

TYPICAL FM MODULATED INSTALLATION for

SRXM-001 SYSTEM COMPONENT LAYOUT

Ground (BLACK)

Attach this wire to the chassis of the car. Be sure that the surface is free of paint and is not rusty. If a proper ground connection is not made, the SRXM-001 System may not operate correctly and stray noise may be picked up by the unit.

To FM Radio

Antenna input

+12V Battery

(YELLOW)

FMModulator

Connect this wire to a terminal which is always energized.

FM Radio

SCU

From Existing Vehicle Antenna

Satellite Radio

Antenna

(Purchased

Separately)

DINCable

Filter Box

& Fuses

		RCAtoRCA
		Cable
+12V Accessory / Ignition (RED)
+12V Accessory / Ignition (RED)
Connect this wire to a terminal which
is energized when the ignition switch
is turned to the "ON" or "ACCESSORY"	13-	Pin
position.	DIN Cable

RRU

Self-Tapping

PhillipsHead

Screw

MOUNTING THE FM MODULATOR

Install the FM Modulator to the mounting surface with the self-tapping screws (4mm x 12mm).