Audiovox SRSIR-001, SRSIR-001FM, SRSIR-001FMR Presetting Desired Channels, To flash for 5 seconds

Page 7

PRESS KEYPAD BUTTONS

TO SELECT DESIRED

CHANNEL

CHANNEL NUMBER

PRESS THE SHIFT

FLASHES

BUTTON

Figure 7. Accessing Channels

SELECTING CHANNEL CATEGORIES (only in Category Mode)

This section describes the procedure used to select a specific group or category of entertainment. Entering into category mode can be accom- plished either by Pressing (SFT)+0981+(SFT) or to quickly shift between Category mode and Channel mode, momentarily Press and release (SFT) then Press and Hold (SFT) for 2 seconds, “ENTER CATEGORY TUNE” or “ENTER CHANNEL TUNE” will be displayed .

1.

With the system powered up, momentarily press the Shift (SFT)

 

button causing the first channel number in the current category

2.

to flash for 5 seconds.

While the number is flashing, momentarily press and release

 

either directional button (WX) a desired category is reached.

 

The category will advance one at a time and will also flash for 5

 

seconds. If no further advance is made, the flashing will stop

3.

and the category will then remain steady.

To advance rapidly in the chosen direction (Up or Down) and

 

while the channel number is flashing, momentarily press and

 

release either directional button (WX) in a rapid manner. Re-

The channel tuning will automatically wrap around from the last to the first channel in that category or vice-versa. When a new category is chosen, the radio will automatically select the first channel in that category.

NOTE: If a directional button is Pressed and Held channels will begin to scroll in numerical sequence through all categories until the button is released. This navigation mode will continue to function in the same manner in the new category. The user must exit this mode before attempting to perform any other function. To exit this mode, enter Shift (SFT) 0980 Shift (SFT).

PRESETTING DESIRED CHANNELS

This section describes how to preset up to 20 channels on your SCU (two groups of 10 channels, upper and lower) for rapid and easy access. Proceed as follows:

1.Select the desired channel you wish to save in memory by using the directional buttons (WX), direct access method, or category select tuning method.

2.With the desired channel displayed, press and hold any one of the numbered keypad buttons until the confirmation tone (or second tone) is heard

(Refer to Confirmation Tone(s) Function). Continue with this process until the first group of 10 preset channels is loaded (lower group).

NOTE: There is a preset channel group indicator icon located in the top right corner of the SCU display. This is used to determine which group you are in.

·(SR1) = Lower Preset Channel Group (first 10 channels)

·(SR2) = Upper Preset Channel Group (next 10 channels)

3.Repeat the procedure in steps 1 and 2 to save nine other desirable channels for quick access.

lease the directional button when a desired channel is reached.

CH

4

PRESS AND HOLD ANY NUMBER BUTTON (0-9) TO COMMIT THE CHANNEL TO PRESET MEMORY

C A T E G O R Y /

C A T E G O R Y /

PRESS

GROUP NUMBER

GROUP

SHIFT

PRESS UP BUTTON TO ADVANCE TO NEXT HIGHER CATEGORY

PRESS DOWN BUTTON TO ADVANCE TO NEXT

SELECT THE DESIRED CHANNEL

THE PRESET MEMORY LOCA- TION APPEARS HERE

FLASHES

LOWER CATEGORY

Figure 9. Setting Preset Channels

Figure 8. Selecting Channel Categories

7

128-6374A

7 of 12

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Owners Manual Contents Sirius Satellite Receiver System Satellite System Control Unit SCUScan Functions Satellite Radio Receiver Unit RRUDisplaying the Identification ID Code Powering UP the SystemSelecting a Satellite Channel Using the UP/DOWN Buttons Directly Accessing a ChannelConfirmation Tones Function Category will then remain steady Presetting Desired ChannelsTo flash for 5 seconds Either directional button WX a desired category is reachedTo change the LCD contrast Special Functions Using the Shift ButtonDirect FM Frequency Selection SFT+0994+SFTNel selection process To enable the LCD backlight dimming featureCodeis entered, Enter Master Code will be displayed Display Messages Troubleshooting ConsiderationsUnit RRU X 4.5 x SpecificationsAudiovox Electronics CORP., HAUPPAUGE, N.Y

SRSIR-001, SRSIR-001FM, SRSIR-001FMR, SRSIR-001 specifications

The Audiovox SRSIR-001 is a versatile and innovative amplification device designed for various audio applications. This model, along with its variations, the SRSIR-001FM and SRSIR-001FMR, showcases a unique set of features tailored to enhance the audio experience.

One of the primary features of the SRSIR-001 is its high-quality sound amplification capability. It uses advanced digital signal processing technology to ensure that the audio output remains clear and powerful across different volume levels. The device is designed to provide a rich sound experience, making it suitable for music lovers, podcast enthusiasts, and anyone who appreciates high-fidelity audio.

With the SRSIR-001FM and SRSIR-001FMR variants, users gain access to additional functionalities, such as FM radio capabilities. This feature allows users to tune into their favorite radio stations directly through the device, bridging the gap between digital and traditional audio consumption. The built-in FM tuner is easy to operate, offering seamless scanning and preset options for quick access to saved frequencies.

Another key characteristic of the Audiovox SRSIR-001 series is its robust connectivity options. The device supports multiple input sources, including Bluetooth connectivity, allowing users to stream audio wirelessly from their smartphones or tablets. This modern feature provides convenience and flexibility, enabling users to enjoy their playlists without the clutter of wires.

The SRSIR-001 series is also designed with portability in mind. Its compact dimensions make it an ideal choice for users who need an amplifier that can be easily transported between different locations, whether it's for a backyard gathering or a small indoor party. Despite its size, it does not compromise on power, delivering high performance in a lightweight design.

Durability is another highlight of this series. Constructed with quality materials, the Audiovox SRSIR-001 is built to withstand daily use while maintaining aesthetic appeal. Its sleek design fits well in various environments, from home setups to outdoor spaces.

In summary, the Audiovox SRSIR-001, along with its FM and FMR versions, represents a thoughtful blend of quality sound, modern connectivity, and portable convenience, making it an excellent choice for audio enthusiasts seeking versatility and reliability in their amplifying solutions. Whether for entertainment or everyday listening, this series is sure to exceed user expectations.
Top Page Image Contents