Black & Decker PRJE600 Emptying the pulp container / strainer, How to take care of your Juicer

English

This appliance should not be operated continuously for more than 1 minutes at a time. After 1 minutes use, the appliance should be allowed to cool at least 2 minute before using it again.

If a blockage occurs, NEVER USE FINGERS OR ANY OBJECT OTHER THAN THE PUSHER TO CLEAR THE INLET CHUTE.

If the food cannot be dislodged, turn the speed selector to the “0” position (OFF) and UNPLUG the POWER CORD FROM OUTLET.

Remove the cover as described in “Before first use” and clear the blockage. Replace the cover, re-connect the Juicer to the electrical supply & resume juicing.

When juicing is completed, the switch should be returned to the off (0) position, and allow the motor to come to a stop. The jug should be left in place until the juice stops flowing from the spout.

UNPLUG POWER CORD FROM THE OUTLET, and disassemble the juice extractor. Empty the pulp from the collector and clean all parts as soon as possible after you have finished processing.

Emptying the pulp container / strainer

If the pulp container (3) becomes full before all of the ingredients are used, press the switch (15) to select the ''0'' (OFF) position and unplug the juicer.

Take hold of the pulp container pull it away from the motor housing and discard the pulp. The pulp can be discarded and the strainer returned to its position in the motor housing.

Reconnect the unit to the power supply & re- commence juicing.

How to take care of your Juicer

The Juicer must be cleaned thoroughly after each use.

Make sure the appliance is switched ‘OFF’ and unplug the unit from the power supply before cleaning.

NOTE: NEVER IMMERSE the motor housing (1) IN WATER OR ANY OTHER LIQUID.

To clean motor housing, wipe clean with a damp cloth. Allow to dry thoroughly before

re-using or storing. The removable parts of the juice extractor assembly should be washed promptly after each use with a mild detergent in warm water. These parts are not dishwasher safe and must be hand washed.

Use a brush to scrub pulp residue from the cutting teeth and strainer holes of the sieve (12).

After washing, rinse and allow all parts to dry thoroughly before re-assembly and storage.

Never use a metal brush to clean the sieve.

Take care when handling the sieve as the blades are sharp.

Warning:

Do not use the appliance if the rotating sieve is damaged.

Protecting the environment

Separate collection. This product must not be disposed of with normal

household waste.

Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose it off with other household waste. Make this product available for separate collection.

Separate collection of used products

and packaging allows materials to be recycled and used again. Use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials.

Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. A list of authorised Black & Decker repair agents and full details of our after-sales service and contact are available on the Internet at: www.2helpU.com

-5-