How to use your Juicer, Inlet Adaptor | Black & Decker PRJE600

English

Fig A - Before first use:

Before using your Juicer for the first time, make sure it is disconnected from the electrical supply, then remove all packaging from the sieve & pulp container.

To remove the packaging, open the right- hand latch (7), then the left-hand latch (8).

Lift the cover (5) from the appliance.

Remove the packing from the sieve (12) and the pusher from the pulp container (3).

Pull the sieve housing & sieve from the Juicer.

All parts must be cleaned as recommended in the section “How to take care of your Juicer”.

The motor housing must only be cleaned with a damp cloth, and dried thoroughly before use.

Inspect the sieve for signs of damage.

Note: Do not use the appliance if the rotating sieve is damaged.

Fig B - How to assemble your Centrifugal Juicer

Place the sieve housing (13) on the motor housing (1), then place the sieve (12) into the sieve housing, pressing it onto the sieve adaptor (14).

must then be gently pushed down and rotated in an anti-clockwise direction until it locks in place.

A separate pusher (9) is provided for use with the adaptor.

Warning: Never use the pusher (9) without the adaptor in place as damage may occur.

To process round ingredients remove the adaptor by rotating it in a clock-wise direction then lift it from the inlet (8).

The pusher is used by first aligning the groove with the rib in the inlet the pushing it down gently.

How to use your Juicer

This appliance is designed to extract juice from fruits & vegetables.

Do not use this appliance for any other purpose. For indoor domestic use only.

Prepare material to be processed by washing thoroughly and peeling as required. Remove all pips and large seeds. Large items may need to be cut into pieces to fit the inlet chute

(8).

Smaller items may be placed directly into the chute (8) and guided into the Juicer using the relevant pusher (9).

Make sure the speed switch (2) is in the ‘’0’’ (OFF) position, then plug the cord-set into a power outlet.

Place the cover (5) on top of the seive housing. Fit the hooks of the latches over the recesses in the cover, then push the right- hand latch (7) and the left-hand latch (8) down ensuring they lock in place.

Fit the pulp container (5) onto the Juicer, making sure the rib on the container locates into the slot in the appliance.

Inlet Adaptor

The inlet can be adapted to suit various ingredients. Large round items such as apples can be processed with no adaptor however long ingredients such as carrots work better with the adaptor (11) in place.

The adaptor (11) is fitted by first aligning the groove with the rib in the inlet. The adaptor

Note: Make sure that the voltage shown on the underside of the motor housing corresponds with the local supply voltage.

Press the switch to select speed l or ll as required.

Press the switch to select speed l or ll as required. Low speed should be used for soft fruits and high speed for harder fruits.

Check the pulp collector is in place, and place a suitable container under the spout (6). Place the ingredients into the inlet chute. The pusher (11) can be used to gently guide the ingredients down the inlet chute. Do not overload the machine. Too much pressure may cause material to jam the inlet chute.

Note: Juice may continue to flow after the appliance has been turned off.

-4-

PRJE600 specifications

The Black & Decker PRJE600 is a versatile juicer designed for health enthusiasts and busy individuals looking to incorporate fresh juices into their daily routine. This electric juicer combines efficiency with user-friendly features, making it a popular choice among consumers who value quality and convenience.

One of the standout features of the PRJE600 is its powerful motor. The 400-watt motor provides ample strength to extract juice from a variety of fruits and vegetables, ensuring maximum yield and minimal waste. This motor operates quietly, allowing users to enjoy their juicing experience without the disruptive noise typical of many other models on the market.

A key characteristic of the Black & Decker PRJE600 is its large feed chute, measuring 3 inches in diameter. This enables users to process whole fruits and vegetables with minimal preparation. The less time spent chopping and slicing means more time to enjoy delicious, nutrient-rich drinks. The juicer also features a built-in pulp collector that helps streamline the juicing process by separating pulp from juice, providing a cleaner experience.

The design of the PRJE600 emphasizes practicality and ease of use. It has a simple control interface, featuring an on/off switch that simplifies operation. The juicer is also easy to assemble and disassemble, making cleanup hassle-free. Most parts are dishwasher safe, so maintenance becomes a quick and effortless task.

Another notable feature is its stainless steel mesh filter, which ensures that the extracted juice is smooth and free of unwanted pulp. This filter is durable and designed to withstand regular use, ensuring longevity for the juicer. The transparent juice container allows users to monitor juice extraction, giving them control over the consistency and quality of their drinks.

Additionally, the Black & Decker PRJE600 is designed with safety in mind. It comes equipped with a locking arm that secures the cover during operation, preventing spills or accidents. Non-slip feet ensure stability on the countertop, providing peace of mind while juicing.

In conclusion, the Black & Decker PRJE600 juicer is an ideal appliance for anyone looking to enhance their dietary habits effortlessly. Its powerful motor, large feed chute, and easy-to-clean components make it an excellent choice for producing fresh juice at home. With a focus on practicality and usability, this juicer stands out as a reliable companion for healthy living.