Your SIM card comes with a standard 4-8 digit PIN number supplied by your network provider. You should change this to your own number as soon as possible.

Connecting to the Network

When the SIM card is successfully opened, your

mobile phone will start to search for an available network (Searching will be displayed on the screen).

When a connection is made, the name of the network provider will appear in the middle of the screen. At this time, your mobile phone will go into standby mode. In addition to dialling and receiving calls, you can also perform the following:

Press R to enter Name/Quick Search.

Press L to enter the function menu.

If Emergency is displayed on the screen, this means that you are outside the normal coverage of the network area; but you can still make emergency calls depending on the strength of the signal.

Your phone supports GPRS (General Packet Radio Service) service. If your network operator has activated your GPRS service and your phone is within the GPRS network area, you may access WAP service through the GPRS network.

Getting Started

9

Page 10
Image 10
Philips S890 manual Connecting to the Network, When the SIM card is successfully opened, your