Battery charging

The new battery is partially charged (about 50%) and may be used directly out of the box. During the first three charge cycles, you must ensure that the battery is fully discharged before re-charging. This will enable optimum performance of the battery.

Plug the charger into the electrical outlet.

Plug the charger connector into the bottom of the phone (with the arrow pointing upward).

At this time, the charge level icon will repeatedly flash at the top right corner of the screen. If the mobile phone is charging while it is turned off, a charge indicator will appear on the screen. If you continue to use the mobile phone when there is insufficient power, the charge indicator may only appear only after a few minutes of charging.

When a full battery icon is displayed and stops flashing, it means that the battery is fully charged. If the mobile phone is charging while it is turned off, there will still be an indication on the screen to indicate that the charging is complete. This process usually takes between 1 and 2.5 hours.

The mobile phone and charger will become warm during charging and this is normal.

When charging is complete, unplug the charger connector from the electrical outlet and the mobile phone.

Charging must be performed in a well-ventilated area with a temperature between -10oC and +55oC. You can only charge with the supplied charger. Using an unapproved charger could be dangerous. In addition to breaching the provisions of the repair warranty, it also violates the certification of this mobile phone.

If the mobile phone automatically shuts down, or indicates Battery is low, you should immediately charge the battery. If the battery power has not been entirely used up before recharging, the recharging duration will be automatically reduced.

Getting Started

7

Page 8
Image 8
Philips S890 manual Battery charging, Plug the charger into the electrical outlet