Changing Categories

When preset channels have been set, you can access those presets simply by pressing the PRESET button on the remote, then an appropriate numeric button. For example, if preset 0 were set to Rock, preset 1 to Hits, and preset 2 to News, you could jump to the News channel quickly by pressing “PRESET-2.”

The channels of the XM service are conveniently organized into categories such as Hits, Rock, News, Sports, etc. To enter Category Mode, press the “MODE” button on the front panel to illuminate the “CAT” LED on the front panel. Alternatively, press the CAT button on the remote control.

Press the up/down buttons to tune to a different category. Note that the category name, channel number, artist name, and song title information in the display change to reflect the new category. A channel’s category may be displayed at any time by entering Category Mode.

Setting and Recalling Presets

The XM-100 can store up to 10 channel presets (numbered 0 to 9). To assign a preset, first tune to a desired channel, in this example 44. Then press and hold the PRESET button on the remote for 4 seconds. The display will change to:

SAVE 044 TO

PRESET NO.?

Press the numeric button you wish to assign this channel to and it will be stored.

To recall a stored preset, press (but don’t hold) the PRESET