Navigating Setup Menus

The XM-100 SETUP Mode allows you to configure options such as forced tuning, blocking, skipping, etc.

To enter the SETUP Mode, press and hold the MODE button on the front of the unit for 4 seconds or depress the SETUP button on the remote. The Setup indicator illuminates, and the menu shown below appears.

Setup Menus

Mode to Exit

The top level structure of the menu system is shown below and indicates which parameters may be configured. In SETUP Mode, the channel up/down buttons on the unit or remote control are used to scroll though the menu options. The Mode button or Setup button on the remote is used to descend to a sub-menu, or to exit up to a higher level.

At the top level menu heading shown above, pressing the Mode button on the unit or remote control exits to normal unit operation. You must navigate back to this menu using the up/down keys for the Mode button to exit back to normal operation of the unit. To help avoid confusion, with few exceptions (in sub menus of blocking or skipping), pressing the power button on the unit or remote control will exit out of Setup Mode and restore normal operation. If you feel stuck in a submenu - press the power button to get out.